Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLC2274AIPWIC OPAMP GP 4 CIRCUIT 14TSSOP |
960 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tube | Active | General Purpose | 4 | Rail-to-Rail | 3.6V/µs | 2.25 MHz | - | 1 pA | 300 µV | 4.8mA (x4 Channels) | 50 mA | 4.4 V | 16 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 14-TSSOP |
|
OPA625IDBVTIC OPAMP GP 1 CIRCUIT SOT23-6 |
766 |
|
Datasheet | - | SOT-23-6 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 115V/µs | 120 MHz | - | 2 µA | 100 µV | 2mA | - | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-6 |
|
LMP7718MAE/NOPBIC OPAMP GP 2 CIRCUIT 8SOIC |
678 |
|
Datasheet | LMP® | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 11.5V/µs | 88 MHz | - | 0.1 pA | 10 µV | 1.3mA (x2 Channels) | 60 mA | 2 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
OPA2343EA/250IC CMOS 2 CIRCUIT 8VSSOP |
1,932 |
|
Datasheet | MicroAmplifier™ | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 6V/µs | 5.5 MHz | - | 0.2 pA | 2 mV | 850µA (x2 Channels) | 50 mA | 2.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
TLV2244IDRIC OPAMP GP 4 CIRCUIT 14SOIC |
4,488 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Rail-to-Rail | 0.002V/µs | 5.5 kHz | - | 100 pA | 600 µV | 1µA (x4 Channels) | 200 µA | 2.5 V | 12 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 14-SOIC |
|
|
OPA4317IPWIC OPAMP ZER-DRIFT 4CIRC 14TSSOP |
2,114 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tube | Active | Zero-Drift | 4 | Rail-to-Rail | 0.15V/µs | 300 kHz | - | 155 pA | 20 µV | 21µA (x4 Channels) | 5 mA | 1.8 V | 5.5 V | -40°C ~ 150°C | - | - | Surface Mount | 14-TSSOP |
|
|
OPA2180IDGKIC OPAMP ZERO-DRIFT 2CIRC 8VSSOP |
430 |
|
Datasheet | Zero-Drift | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Active | Zero-Drift | 2 | Rail-to-Rail | 0.8V/µs | 2 MHz | - | 250 pA | 15 µV | 450µA (x2 Channels) | 18 mA | 4.5 V | 36 V | -40°C ~ 105°C | - | - | Surface Mount | 8-VSSOP |
|
|
INA155EA/250IC INST AMP 1 CIRCUIT 8VSSOP |
253 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Instrumentation | 1 | Rail-to-Rail | 6.5V/µs | - | 550 kHz | 1 pA | 200 µV | 1.7mA | 50 mA | 2.7 V | 5.5 V | -55°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
|
OPA743NA/250IC OPAMP GP 1 CIRCUIT SOT23-5 |
227 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 10V/µs | 7 MHz | - | 1 pA | 1.5 mV | 1.1mA | 20 mA | 3.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
|
OPA4342EA/250IC CMOS 4 CIRCUIT 14TSSOP |
694 |
|
Datasheet | MicroAmplifier™ | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | Rail-to-Rail | 1V/µs | 1 MHz | - | 0.2 pA | 1 mV | 150µA (x4 Channels) | 15 mA | 2.7 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-TSSOP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
