Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OPA180IDGKTIC OPAMP ZERO-DRIFT 1CIRC 8VSSOP |
535 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Zero-Drift | 1 | Rail-to-Rail | 0.8V/µs | 2 MHz | - | 250 pA | 15 µV | 450µA | - | 4.5 V | 36 V | -40°C ~ 105°C | - | - | Surface Mount | 8-VSSOP |
|
OPA2373AIDRCTIC CMOS 2 CIRCUIT 10VSON |
426 |
|
Datasheet | - | 10-VFDFN Exposed Pad | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 5V/µs | 6.5 MHz | - | 0.5 pA | 1 mV | 585µA (x2 Channels) | 5 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 10-VSON (3x3) |
|
TLV2442AIDRIC CMOS 2 CIRCUIT 8SOIC |
6,223 |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 1.4V/µs | 1.81 MHz | - | 1 pA | 300 µV | 750µA (x2 Channels) | 50 mA | 2.7 V | 10 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
INA331AIDGKRIC INST AMP 1 CIRCUIT 8VSSOP |
4,760 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Instrumentation | 1 | Rail-to-Rail | 5V/µs | - | 2 MHz | 0.5 pA | 250 µV | 415µA | 48 mA | 2.5 V | 5.5 V | -55°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
|
TLV2241IDBVTIC OPAMP GP 1 CIRCUIT SOT23-5 |
1,649 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 0.002V/µs | 5.5 kHz | - | 100 pA | 600 µV | 1µA | 200 µA | 2.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
|
TLV2442CDIC CMOS 2 CIRCUIT 8SOIC |
682 |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | CMOS | 2 | Rail-to-Rail | 1.4V/µs | 1.81 MHz | - | 1 pA | 300 µV | 750µA (x2 Channels) | 50 mA | 2.7 V | 10 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
|
OPA137UAIC OPAMP GP 1 CIRCUIT 8SOIC |
240 |
|
Datasheet | MicroAmplifier™ | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | J-FET | 1 | - | 3.5V/µs | 1 MHz | - | 5 pA | 2.5 mV | 220µA | 60 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
OPA330AIDIC OPAMP ZERO-DRIFT 1 CIRC 8SOIC |
228 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Zero-Drift | 1 | Rail-to-Rail | 0.16V/µs | 350 kHz | - | 200 pA | 8 µV | 21µA | 5 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
TL052AIDRIC OPAMP JFET 2 CIRCUIT 8SOIC |
4,655 |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 2 | - | 20.7V/µs | 3 MHz | - | 30 pA | 650 µV | 4.8mA (x2 Channels) | 80 mA | 10 V | 30 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
|
OPA330AIDCKTIC OPAMP ZERO-DRIFT 1CIRC SC70-5 |
4,210 |
|
Datasheet | - | 5-TSSOP, SC-70-5, SOT-353 | Tape & Reel (TR) | Active | Zero-Drift | 1 | Rail-to-Rail | 0.16V/µs | 350 kHz | - | 200 pA | 8 µV | 21µA | 5 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SC-70-5 |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
