Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LM6152BCMX/NOPBIC OPAMP GP 2 CIRCUIT 8SOIC |
690 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 30V/µs | 80 MHz | - | 500 nA | 300 µV | 1.6mA (x2 Channels) | 16.9 mA | 2.7 V | 24 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
|
TLE2062ACDRIC OPAMP JFET 2 CIRCUIT 8SOIC |
6,251 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 2 | - | 3.4V/µs | 2 MHz | - | 4 pA | 800 µV | 625µA (x2 Channels) | 80 mA | 7 V | 36 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 8-SOIC |
|
OPA856IDSGRIC OPAMP GP 1 CIRCUIT 8WSON |
1,100 |
|
Datasheet | - | 8-WFDFN Exposed Pad | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 350V/µs | 1.08 GHz | 1.1 GHz | 15 µA | 200 µV | 17.2mA | 105 mA | 3.3 V | 5.25 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-WSON (2x2) |
|
|
THS4001IDIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
1,058 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 1 | - | 400V/µs | 270 MHz | 270 MHz | 2.6 µA | 2 mV | 7.8mA | 100 mA | 5 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
OPA2743UAIC CMOS 2 CIRCUIT 8SOIC |
339 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | CMOS | 2 | Rail-to-Rail | 10V/µs | 7 MHz | - | 1 pA | 1.5 mV | 1.1mA (x2 Channels) | 20 mA | 3.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
TLE2142CPIC OPAMP GP 2 CIRCUIT 8DIP |
168 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 2 | Rail-to-Rail | 45V/µs | 5.9 MHz | - | 700 nA | 290 µV | 6.9mA (x2 Channels) | 50 mA | 4 V | 44 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
INA330AIDGSTIC OPAMP GP 1 CIRCUIT 10VSSOP |
589 |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | - | - | 1 kHz | 200 pA | 60 µV | 2.6mA | 25 mA | 2.7 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 10-VSSOP |
|
|
OPA1611AIDIC AUDIO 1 CIRCUIT 8SOIC |
2,714 |
|
Datasheet | SoundPlus™ | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Audio | 1 | - | 27V/µs | 80 MHz | - | 60 nA | 100 µV | 3.6mA | 62 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
OPA552UAIC OPAMP GP 1 CIRCUIT 8SOIC |
318 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | - | 24V/µs | 12 MHz | - | 20 pA | 1 mV | 7mA | 200 mA | 8 V | 60 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
OPA2210IDIC OPAMP GP 2 CIRCUIT 8SOIC |
3,151 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 2 | Rail-to-Rail | 6.4V/µs | 18 MHz | - | 300 pA | 5 µV | 2.2mA (x2 Channels) | 65 mA | 4.5 V | 36 V | -55°C ~ 150°C (TA) | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
