Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MC1458PIC OPAMP GP 2 CIRCUIT 8DIP |
4,408 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 2 | - | 0.5V/µs | 1 MHz | - | 80 nA | 1 mV | 3.4mA (x2 Channels) | 25 mA | 10 V | 30 V | 0°C ~ 70°C (TA) | - | - | Through Hole | 8-PDIP |
|
TLV9061QDBVRQ1AUTOMOTIVE SINGLE 5.5-V 10-MHZ |
19,361 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | Standard | 1 | Push-Pull, Rail-to-Rail | 6.5V/µs | 10 MHz | - | 5 pA | 300 µV | 538µA | 50 mA | 1.8 V | 5.5 V | -40°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | SOT-23-5 |
|
TL031CDRIC OPAMP JFET 1 CIRCUIT 8SOIC |
10,743 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 1 | - | 5.1V/µs | 1.1 MHz | - | 2 pA | 500 µV | 217µA | - | 10 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
|
TLV9061QDCKRQ1AUTOMOTIVE, SINGLE, 5.5-V 10-MHZ |
9,143 |
|
Datasheet | - | 5-TSSOP, SC-70-5, SOT-353 | Tape & Reel (TR) | Active | CMOS | 1 | Push-Pull, Rail-to-Rail | 6.5V/µs | 10 MHz | - | 5 pA | 300 µV | 538µA | 50 mA | 1.8 V | 5.5 V | -40°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | SC-70-5 |
|
|
OPA1677DRAMPLIFIER |
2,748 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Standard | 1 | Push-Pull, Rail-to-Rail | 9V/µs | 16 MHz | - | 10 pA | 500 µV | 2mA | 50 mA | 4.5 V | 36 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOIC |
|
TLV9002SIRUGRIC OPAMP GP 2 CIRCUIT 10X2QFN |
4,272 |
|
Datasheet | - | 10-XFQFN | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 2V/µs | 1 MHz | - | 5 pA | 400 µV | 60µA | 40 mA | 1.8 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 10-X2QFN (2x1.5) |
|
LM3900NIC OPAMP GP 4 CIRCUIT 14DIP |
3,543 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 4 | - | 20V/µs | 2.5 MHz | - | 30 nA | - | 6.2mA (x4 Channels) | 10 mA | 4.4 V | 32 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
LM2902KVQDRQ1IC OPAMP GP 4 CIRCUIT 14SOIC |
13,295 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | - | 0.5V/µs | 1.2 MHz | - | 20 nA | 3 mV | 1.4mA (x4 Channels) | 60 mA | 3 V | 32 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 14-SOIC |
|
TLV8801DBVRIC OPAMP GP 1 CIRCUIT SOT23-5 |
3,785 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 0.0015V/µs | 6 kHz | - | 0.1 pA | 550 µV | 450nA | 4.7 mA | 1.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
|
LM3900DRIC OPAMP GP 4 CIRCUIT 14SOIC |
2,795 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | - | 20V/µs | 2.5 MHz | - | 30 nA | - | 6.2mA (x4 Channels) | 10 mA | 4.4 V | 32 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
