Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
V62/04755-06YEENHANCED PRODUCT EXCALIBUR HIGH- |
2,232 |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tape & Reel (TR) | Obsolete | Standard | 4 | Single-Ended | 0.5V/µs | 2.8 MHz | - | 50 nA | 120 µV | 1.05mA | 40 mA | 4 V | 40 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 16-SOIC |
|
|
INA125TDA1IC INST AMP 1 CIRCUIT DIE |
2,998 |
|
Datasheet | - | Die | Tube | Obsolete | Instrumentation | 1 | - | - | - | - | - | - | - | - | - | - | - | - | - | Surface Mount | Die |
|
OPA827AIDG4IC OPAMP JFET 1 CIRCUIT 8SOIC |
3,872 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Discontinued at Digi-Key | J-FET | 1 | - | 28V/µs | 22 MHz | - | 15 pA | 75 µV | 4.8mA | 30 mA | 8 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
OPA656UBG4IC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
2,041 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Voltage Feedback | 1 | - | 295V/µs | 230 MHz | 500 MHz | 1 pA | 250 µV | 14mA | - | 8 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
OPA2132U/2K5E4IC OPAMP JFET 2 CIRCUIT 8SOIC |
1,315 |
|
Datasheet | OPAx132 | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | J-FET | 2 | - | 20V/µs | 8 MHz | - | 5 pA | 250 µV | 4mA (x2 Channels) | 40 mA | 5 V | 36 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
|
|
OPA2132U/2K5G4IC OPAMP JFET 2 CIRCUIT 8SOIC |
1,246 |
|
Datasheet | OPAx132 | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | J-FET | 2 | - | 20V/µs | 8 MHz | - | 5 pA | 250 µV | 4mA (x2 Channels) | 40 mA | 5 V | 36 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
|
|
THS4502CDG4IC OPAMP DIFF 1 CIRCUIT 8SOIC |
3,174 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Differential | 1 | Differential | 2800V/µs | 300 MHz | 370 MHz | 4 µA | 1 mV | 23mA | - | 4.5 V | 15 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
LMH6882SQX/NOPBIC OPAMP DIFF 2 CIRCUIT 36WQFN |
4,497 |
|
Datasheet | LMH® | 36-WFQFN Exposed Pad | Tape & Reel (TR) | Active | Differential | 2 | Differential | 6000V/µs | - | 2.4 GHz | - | - | 200mA | - | 4.75 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 36-WQFN (6x6) |
|
OPA4251UA/2K5G4IC OPAMP GP 4 CIRCUIT 14SOIC |
4,440 |
|
Datasheet | microPOWER™ | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Discontinued at Digi-Key | General Purpose | 4 | Rail-to-Rail | 0.01V/µs | 35 kHz | - | 20 nA | 100 µV | - | 50 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
LMH6503MAIC VARIABLE GAIN 1 CIRC 14SOIC |
1,386 |
|
Datasheet | LMH® | 14-SOIC (0.154", 3.90mm Width) | Tube | Not For New Designs | Variable Gain | 1 | - | 1800V/µs | - | 135 MHz | 11 µA | - | 37mA | 90 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
