Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
THS4302RGTTG4IC OPAMP GP 1 CIRCUIT 16VQFN |
4,550 |
|
Datasheet | - | 16-VFQFN Exposed Pad | Tape & Reel (TR) | Discontinued at Digi-Key | General Purpose | 1 | - | 5500V/µs | 12 GHz | 2.4 GHz | 7 µA | 2 mV | 37mA | - | 3 V | 5 V | -40°C ~ 85°C | - | - | Surface Mount | 16-VQFN (3x3) |
|
LM6132BIMXIC OPAMP GP 2 CIRCUIT 8SOIC |
1,944 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | Rail-to-Rail | 14V/µs | 11 MHz | - | 125 nA | 1.7 mV | 390µA (x2 Channels) | 3.5 mA | 1.8 V | 24 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
|
OPA2703UA/2K5IC CMOS 2 CIRCUIT 8SOIC |
1,633 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 0.6V/µs | 1 MHz | - | 1 pA | 160 µV | 160µA (x2 Channels) | 10 mA | 4 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
THS3201DBVTG4IC OPAMP CFA 1 CIRCUIT SOT23-5 |
1,268 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Obsolete | Current Feedback | 1 | - | 9800V/µs | - | 1.8 GHz | 14 µA | 700 µV | 14mA | 115 mA | 6.6 V | 15 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
TLC254CNE4QUAD, 16-V, 1.7-MHZ, IN TO V- OP |
3,160 |
|
Datasheet | LinCMOS™ | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | CMOS | 4 | Push-Pull | 4.6V/µs | 2.2 MHz | - | 0.7 pA | 1.1 mV | 3.8mA (x4 Channels) | - | 1.4 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
.jpg "INA4290A5IRGVT")
|
INA4290A5IRGVTIC OPAMP |
2,109 |
|
Datasheet | - | 16-VQFN Exposed Pad | Tape & Reel (TR) | Active | Current Sense | - | - | 2V/µs | - | 800 kHz | 20 µA | 6 µV | 1.25mA (x4 Channels) | - | 2.7 V | 20 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 16-VQFN (4x4) |
|
LM8262MM/NOPBIC OPAMP GP 2 CIRCUIT 8VSSOP |
3,759 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | Rail-to-Rail | 15V/µs | 24 MHz | - | 1.05 µA | 700 µV | 2.5mA (x2 Channels) | 100 mA | 2.5 V | 22 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
|
INA333AIDGKTG4IC INST AMP 1 CIRCUIT 8VSSOP |
2,827 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Discontinued at Digi-Key | Instrumentation | 1 | Rail-to-Rail | 0.16V/µs | - | 150 kHz | 70 pA | 10 µV | 50µA | 40 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
|
|
OPA2277TDD1IC OPAMP GP 2 CIRCUIT DIE |
1,928 |
|
Datasheet | - | Die | Tube | Obsolete | General Purpose | 2 | - | - | - | - | - | 25 µV | - | - | 4 V | 36 V | - | - | - | Surface Mount | Die |
|
THS3062DDARIC OPAMP CFA 2 CIRC 8SOPWRPAD |
3,330 |
|
Datasheet | - | 8-PowerSOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Current Feedback | 2 | - | 7000V/µs | 2.2 GHz | 300 MHz | 6 µA | 700 µV | 8.3mA | 145 mA | 10 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO PowerPad |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
