Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
THS4503IDRG4IC OPAMP DIFF 1 CIRCUIT 8SOIC |
1,251 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Differential | 1 | Differential | 2800V/µs | 300 MHz | 370 MHz | 4 µA | 1 mV | 23mA | - | 4.5 V | 15 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
TLC2252AQDREPIC OPAMP GP 2 CIRCUIT 8SOIC |
3,129 |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 0.12V/µs | 210 kHz | - | 1 pA | 200 µV | 80µA (x2 Channels) | 50 mA | 4.4 V | 16 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-SOIC |
|
OPA4353UAG4IC CMOS 4 CIRCUIT 14SOIC |
3,701 |
|
Datasheet | MicroAmplifier™ | 14-SOIC (0.154", 3.90mm Width) | Tube | Discontinued at Digi-Key | CMOS | 4 | Rail-to-Rail | 22V/µs | 44 MHz | - | 0.5 pA | 3 mV | 5.2mA (x4 Channels) | 40 mA | 2.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
|
VCA822IDG4IC VARIABLE GAIN 1 CIRC 14SOIC |
1,757 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Discontinued at Digi-Key | Variable Gain | 1 | - | 1700V/µs | - | 168 MHz | 19 µA | 4 mV | 36mA | 160 mA | 7 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
THS3122CDDARIC OPAMP CFA 2 CIRC 8SOPWRPAD |
1,063 |
|
Datasheet | - | 8-PowerSOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Current Feedback | 2 | - | 1550V/µs | 138 MHz | 160 MHz | 6 µA | 4.4 mV | 8.4mA (x2 Channels) | 440 mA | 10 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO PowerPad |
|
|
THS3122CDDARG3IC OPAMP CFA 2 CIRC 8SOPWRPAD |
4,205 |
|
Datasheet | - | 8-PowerSOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Current Feedback | 2 | - | 1550V/µs | 138 MHz | 160 MHz | 6 µA | 4.4 mV | 8.4mA (x2 Channels) | 440 mA | 10 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO PowerPad |
|
|
INA128UA/2K5E4IC INST AMP 1 CIRCUIT 8SOIC |
4,837 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Instrumentation | 1 | - | 4V/µs | - | 1.3 MHz | 2 nA | 25 µV | 700µA | 15 mA | 4.5 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
INA128UA/2K5G4IC INST AMP 1 CIRCUIT 8SOIC |
2,571 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Instrumentation | 1 | - | 4V/µs | - | 1.3 MHz | 2 nA | 25 µV | 700µA | 15 mA | 4.5 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
LME49740MAX/NOPBIC AUDIO 4 CIRCUIT 14SOIC |
2,245 |
|
Datasheet | LME® | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Audio | 4 | - | 20V/µs | 55 MHz | 10 MHz | 10 nA | 100 µV | 18.5mA (x4 Channels) | 26 mA | 5 V | 34 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
|
OPA4743UA/2K5G4IC CMOS 4 CIRCUIT 14SOIC |
4,045 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Discontinued at Digi-Key | CMOS | 4 | Rail-to-Rail | 10V/µs | 7 MHz | - | 1 pA | 1.5 mV | 1.1mA (x4 Channels) | 20 mA | 3.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
