Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MC33174NIC OPAMP GP 4 CIRCUIT 14DIP |
1,648 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 4 | - | 2V/µs | 2.1 MHz | - | 100 nA | 1 mV | 220µA | 27 mA | 4 V | 44 V | -40°C ~ 105°C | - | - | Through Hole | 14-DIP |
|
LM224WDTLINEAR IC'S |
4,791 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 4 | Push-Pull | 0.4V/µs | 1.3 MHz | - | 20 nA | 2 mV | 1.5mA | 40 mA | 3 V | 30 V | -40°C ~ 105°C | - | - | Surface Mount | 14-SO |
|
TL062CNIC OPAMP JFET 2 CIRC 8MINI DIP |
2,688 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | J-FET | 2 | - | 3.5V/µs | 1 MHz | - | 30 pA | 3 mV | 200µA (x2 Channels) | 20 mA | 6 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-Mini DIP |
|
MC4558IPTIC OPAMP GP 2 CIRCUIT 8SO |
2,403 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | - | 2.2V/µs | 5.5 MHz | - | 50 nA | 1 mV | 2.3mA | 20 mA | 4 V | 40 V | -40°C ~ 105°C | - | - | Surface Mount | 8-SO |
|
|
TS27L2AIDIC CMOS 2 CIRCUIT 8SOIC |
2,549 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | CMOS | 2 | - | 0.04V/µs | 100 kHz | - | 1 pA | 1.1 mV | 10µA (x2 Channels) | 45 mA | 3 V | 16 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
TSV911IDIC OPAMP GP 1 CIRCUIT 8SOIC |
2,929 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 1 | Rail-to-Rail | 4.5V/µs | 8 MHz | - | 1 pA | 4.5 mV | 820µA | 35 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
TSL6002IDTLinear IC's |
2,691 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Standard | 2 | Single Ended, Rail-to-Rail | 0.4V/µs | 1 MHz | - | 1 pA | 750 µV | 75µA (x2 Channels) | 30 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SO |
|
LM358YPTIC OPAMP GP 2 CIRCUIT 8TSSOP |
2,901 |
|
Datasheet | - | 8-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | - | 0.6V/µs | 1.1 MHz | - | 20 nA | 2 mV | 700µA (x2 Channels) | 40 mA | 3 V | 30 V | 0°C ~ 70°C | Automotive | AEC-Q100 | Surface Mount | 8-TSSOP |
|
TSM104WAINIC OPAMP GP 4 CIRCUIT 16DIP |
3,955 |
|
Datasheet | - | 16-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 4 | - | 0.3V/µs | 900 kHz | - | 20 nA | 500 µV | 1.4mA | 40 mA | 3 V | 32 V | -40°C ~ 105°C | - | - | Through Hole | 16-DIP |
|
|
LM2904BYDTLinear IC's |
1,507 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Standard | 2 | Push-Pull | 0.75V/µs | 1.2 MHz | - | 150 nA | 4 mV | 350µA (x2 Channels) | 32 mA | 3 V | 36 V | -40°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 8-SO |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
