Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TS1871IYLTIC OPAMP GP 1 CIRCUIT SOT23-5 |
2,983 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 0.6V/µs | 1.8 MHz | - | 70 nA | 100 µV | 500µA | 80 mA | 1.8 V | 6 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | SOT-23-5 |
|
TSV623ISTIC CMOS 2 CIRCUIT 10MINISO |
1,250 |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 0.14V/µs | 420 kHz | - | 1 pA | 4 mV | 29µA | 74 mA | 1.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 10-MiniSO |
|
TSV612AISTIC CMOS 2 CIRCUIT 8MINISO |
968 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 0.04V/µs | 120 kHz | - | 1 pA | 800 µV | 10.5µA | 63 mA | 1.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-MiniSO |
|
|
TSV992AIYSTIC OPAMP GP 2 CIRCUIT 8MINISO |
3,980 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 10V/µs | 20 MHz | - | 1 pA | 100 µV | 820µA (x2 Channels) | 35 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-MiniSO |
|
TSC1021AIPTIC CURR SENSE 1 CIRCUIT 8TSSOP |
8,209 |
|
Datasheet | - | 8-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | - | 0.45V/µs | - | 800 kHz | 7 µA | 1.5 mV | 300µA | - | 3.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-TSSOP |
|
TSB512IYSTRAIL-TO-RAIL INPUTS AND OUTPUTS, |
1,478 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 3V/µs | 6 MHz | - | - | 1.5 mV | 1.8mA (x2 Channels) | 50 mA | 2.7 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MiniSO |
|
TSB572IYQ2TIC OPAMP GP 2 CIRCUIT 8DFN |
1,365 |
|
Datasheet | - | 8-WDFN Exposed Pad | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 1V/µs | 2.2 MHz | - | 8 nA | 1.5 mV | 380µA (x2 Channels) | 65 mA | 4 V | 36 V | -40°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 8-DFN (3x3) |
|
|
TSB711IYLTIC OPAMP GP 1 CIRCUIT SOT23-5 |
2,871 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 3V/µs | 6 MHz | - | 300 nA | 1.2 mV | 1.8mA | 50 mA | 2.7 V | 36 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | SOT-23-5 |
|
TS27L4AIDTIC CMOS 4 CIRCUIT 14SO |
5,365 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | - | 0.04V/µs | 100 kHz | - | 1 pA | 900 µV | 10µA (x4 Channels) | 45 mA | 3 V | 16 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SO |
|
|
TSV623AISTIC CMOS 2 CIRCUIT 10MINISO |
4,000 |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 0.14V/µs | 420 kHz | - | 1 pA | 1 mV | 29µA | 74 mA | 1.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 10-MiniSO |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
