Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TS512INIC OPAMP GP 2 CIRCUIT 8MINI DIP |
3,097 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | - | 1.5V/µs | 3 MHz | - | 50 nA | 500 µV | 500µA (x2 Channels) | 23 mA | 3 V | 30 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Through Hole | 8-Mini DIP |
|
TSH114IDTIC OPAMP CFA 4 CIRCUIT 14SO |
2,079 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Current Feedback | 4 | - | 450V/µs | - | 100 MHz | 3 µA | 900 µV | 3.2mA | 47 mA | 5 V | 12 V | -40°C ~ 85°C | Automotive | AEC-Q100 | Surface Mount | 14-SO |
|
TSH114IPTIC OPAMP CFA 4 CIRCUIT 14TSSOP |
4,103 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Obsolete | Current Feedback | 4 | - | 450V/µs | - | 100 MHz | 3 µA | 900 µV | 3.2mA | 47 mA | 5 V | 12 V | -40°C ~ 85°C | Automotive | AEC-Q100 | Surface Mount | 14-TSSOP |
|
TSH72CDTIC OPAMP GP 2 CIRCUIT 8SO |
1,280 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | Rail-to-Rail | 118V/µs | 65 MHz | 100 MHz | 6 µA | 1.1 mV | 8.2mA | 55 mA | 3 V | 12 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
TSM104WAIDIC OPAMP GP 4 CIRCUIT 16SO |
4,311 |
|
Datasheet | - | 16-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 4 | - | 0.3V/µs | 900 kHz | - | 20 nA | 500 µV | 1.4mA | 40 mA | 3 V | 32 V | -40°C ~ 105°C | - | - | Surface Mount | 16-SO |
|
|
TS922INIC OPAMP GP 2 CIRCUIT 8MINI DIP |
2,198 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 1.3V/µs | 4 MHz | - | 15 nA | 3 mV | 2mA | 80 mA | 2.7 V | 12 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Through Hole | 8-Mini DIP |
|
TSM104WIDIC OPAMP GP 4 CIRCUIT 16SO |
4,272 |
|
Datasheet | - | 16-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 4 | - | 0.3V/µs | 900 kHz | - | 20 nA | 1 mV | 1.4mA | 40 mA | 3 V | 32 V | -40°C ~ 105°C | - | - | Surface Mount | 16-SO |
|
|
LM2902WYDTIC OPAMP GP 4 CIRCUIT 14SO |
3,169 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Push-Pull | 0.4V/µs | 1.3 MHz | - | 20 nA | 2 mV | 1.5mA (x4 Channels) | 40 mA | 3 V | 30 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 14-SO |
|
|
TSH81IDTIC OPAMP GP 1 CIRCUIT 8SOIC |
4,562 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 118V/µs | 65 MHz | 100 MHz | 6 µA | 800 µV | 55mA | 55 mA | 4.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
TS271ACDIC OPAMP GP 1 CIRCUIT 8SOIC |
1,224 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 1 | - | 0.04V/µs | 100 kHz | - | 1 pA | 900 µV | 10µA | 45 mA | 3 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
