Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LT1078ACHIC OPAMP GP 2 CIRCUIT TO5 |
3,973 |
|
Datasheet | LT® | TO-205-8, TO-5-8 Metal Can | Bulk | Obsolete | General Purpose | 2 | - | 0.1V/µs | 200 kHz | - | 6 nA | 30 µV | 38µA (x2 Channels) | - | 2.2 V | 30 V | 0°C ~ 70°C | - | - | Through Hole | TO-5 |
|
LT1124AMPS8-1#TRPBFIC OPAMP GP 2 CIRCUIT 8SO |
2,388 |
|
Datasheet | LT® | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | - | 4.5V/µs | 12.5 MHz | - | 7 nA | 20 µV | 2.3mA (x2 Channels) | - | 8 V | 44 V | -55°C ~ 125°C | - | - | Surface Mount | 8-SO |
|
|
AD8555ARZ-REEL7IC OPAMP ZERO-DRIFT 1 CIRC 8SOIC |
3,021 |
|
Datasheet | DigiTrim® | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Zero-Drift | 1 | - | 1.2V/µs | 2 MHz | - | 16 nA | 2 µV | 2mA | 10 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
LT1463CN#PBFIC OPAMP JFET 4 CIRCUIT 14DIP |
2,943 |
|
Datasheet | LT® | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | J-FET | 4 | - | 0.13V/µs | 175 kHz | - | 1 pA | 600 µV | 28µA (x4 Channels) | 17 mA | 10 V | 30 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
|
LT1465CN#PBFIC OPAMP JFET 4 CIRCUIT 14DIP |
4,652 |
|
Datasheet | LT® | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | J-FET | 4 | - | 0.9V/µs | 1 MHz | - | 0.5 pA | 600 µV | 145µA (x4 Channels) | - | 10 V | 30 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
AD8037ARZ-REELIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
2,410 |
|
Datasheet | CLAMPIN™ | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 1 | - | 1500V/µs | - | 270 MHz | 3 µA | 2 mV | 18.5mA | 70 mA | 6 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
AD712KR-REEL7IC OPAMP BIFET DUAL PREC 8SOIC |
1,801 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Cut Tape (CT) | Obsolete | J-FET | 2 | - | 20V/µs | - | 4 MHz | 25 pA | 300 µV | 5mA | 25 mA | 9 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
AD8626ARMZ-R2IC OPAMP JFET 5MHZ DUAL LP 8MSOP |
4,776 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Cut Tape (CT) | Obsolete | J-FET | 2 | Rail-to-Rail | 5V/µs | 5 MHz | - | 0.25 pA | 350 µV | 710µA (x2 Channels) | 15 mA | 5 V | 26 V | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
|
LTC2051HVCMS10#TRPBFIC OPAMP ZERO-DRIFT 2CIRC 10MSOP |
1,475 |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Chopper (Zero-Drift) | 2 | Rail-to-Rail | 2V/µs | 3 MHz | - | 90 pA | 1 µV | 1mA (x2 Channels) | - | 2.7 V | 5.5 V | 0°C ~ 70°C | - | - | Surface Mount | 10-MSOP |
|
|
OP27CHIC OPAMP GP 1 CIRCUIT TO5 |
3,435 |
|
Datasheet | - | TO-205-8, TO-5-8 Metal Can | Bulk | Obsolete | General Purpose | 1 | - | 2.8V/µs | 8 MHz | - | 15 nA | 30 µV | - | - | 8 V | 36 V | -55°C ~ 125°C | - | - | Through Hole | TO-5 |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
