Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LTC6101VHVBIS5#TRPBFIC CURR SENSE 1 CIRCUIT TSOT23-5 |
1,512 |
|
Datasheet | - | SOT-23-5 Thin, TSOT-23-5 | Tape & Reel (TR) | Active | Current Sense | 1 | - | - | 200 kHz | - | 100 nA | 150 µV | 200µA | 1 mA | 5 V | 100 V | -40°C ~ 85°C | - | - | Surface Mount | TSOT-23-5 |
|
LT1397CGN#TRPBFIC OPAMP CFA 4 CIRCUIT 16SSOP |
3,717 |
|
Datasheet | LT® | 16-SSOP (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Current Feedback | 4 | - | 800V/µs | - | 400 MHz | 10 µA | 1 mV | 4.6mA (x4 Channels) | 80 mA | 4 V | 12 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SSOP |
|
AD8605ART-REEL7IC OPAMP GP R-R CMOS LN SOT23-5 |
2,010 |
|
Datasheet | DigiTrim® | SC-74A, SOT-753 | Cut Tape (CT) | Obsolete | General Purpose | 1 | Rail-to-Rail | 5V/µs | 10 MHz | - | 0.2 pA | 80 µV | 1mA | 80 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
LT1806CS8#TRPBFIC OPAMP GP 1 CIRCUIT 8SO |
4,272 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 140V/µs | 325 MHz | - | 5 µA | 100 µV | 11mA | - | 2.5 V | 12.6 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
|
LTC2057HVIS8#TRPBFIC OPAMP ZER-DRIFT 1CIRC 8SO |
3,688 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Zero-Drift | 1 | Rail-to-Rail | 0.45V/µs | 1.5 MHz | - | 30 pA | 0.5 µV | 900µA | - | 4.75 V | 60 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
|
LTC6911CMS-2#TRPBFIC OPAMP PGA 2 CIRCUIT 10MSOP |
4,847 |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Programmable Gain | 2 | Rail-to-Rail | 16V/µs | 11 MHz | - | - | 2 mV | 3.1mA (x2 Channels) | 35 mA | 2.7 V | 10.5 V | 0°C ~ 70°C | - | - | Surface Mount | 10-MSOP |
|
|
AD8028ARZ-REELIC OPAMP GP 2 CIRCUIT 8SOIC |
3,965 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 100V/µs | - | 190 MHz | 4 µA | 200 µV | 6.5mA (x2 Channels) | 120 mA | 2.7 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
OP15GHIC OPAMP JFET 1 CIRCUIT TO5 |
4,257 |
|
Datasheet | - | TO-205-8, TO-5-8 Metal Can | Bulk | Obsolete | J-FET | 1 | - | 9V/µs | 5.4 MHz | - | 60 pA | 500 µV | 2.8mA | - | 20 V | 30 V | 0°C ~ 70°C | - | - | Through Hole | TO-5 |
|
|
OP16GHIC OPAMP JFET 1 CIRCUIT TO5 |
3,633 |
|
Datasheet | - | TO-205-8, TO-5-8 Metal Can | Bulk | Obsolete | J-FET | 1 | - | 16V/µs | 7.2 MHz | - | 60 pA | 500 µV | 4.8mA | - | 20 V | 30 V | 0°C ~ 70°C | - | - | Through Hole | TO-5 |
|
LTC2065IUD#TRPBFIC OPAMP ZER-DRIFT 4CIRC 16QFN |
3,444 |
|
Datasheet | - | 16-WFQFN Exposed Pad | Tape & Reel (TR) | Active | Zero-Drift | 4 | Rail-to-Rail | 0.0035V/µs | 20 kHz | - | 3 pA | 1 µV | 1.4µA (x4 Channels) | 51 mA | 1.7 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 16-QFN (3x3) |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
