Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ADA4097-2HRZDUAL PRECISION, MICRO-POWER OTT |
1,101 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Voltage Feedback | 2 | Rail-to-Rail | 0.1V/µs | 130 kHz | - | 100 pA | 20 µV | 42µA (x2 Channels) | 45 mA | 3 V | 50 V | -55°C ~ 150°C (TA) | - | - | Surface Mount | 8-SOIC |
|
LT1496IN#PBFIC OPAMP GP 4 CIRCUIT 14DIP |
108 |
|
Datasheet | LT® | 14-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 4 | Rail-to-Rail | 0.001V/µs | 2.7 kHz | - | 250 pA | 200 µV | 1µA (x4 Channels) | 1.5 mA | 2.2 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
AD8222HBCPZ-WPIC INST AMP 2 CIRCUIT 16LFCSP |
1,009 |
|
Datasheet | - | 16-VQFN, CSP | Tray | Active | Instrumentation | 2 | - | 2V/µs | 7 MHz | 1.2 MHz | 200 pA | 60 µV | 900µA (x2 Channels) | 18 mA | 4.6 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 16-LFCSP-VQ (4x4) |
|
AD842KNZIC OPAMP GP 1 CIRCUIT 14DIP |
1,964 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 1 | - | 375V/µs | 80 MHz | - | 3.5 µA | 300 µV | 13mA | 100 mA | 10 V | 36 V | 0°C ~ 75°C | - | - | Through Hole | 14-PDIP |
|
LT1467LCS#PBFIC OPAMP GP 4 CIRCUIT 16SO |
2,340 |
|
Datasheet | LT® | 16-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 4 | Rail-to-Rail | 0.04V/µs | 120 kHz | - | 3 nA | 110 µV | 60µA (x4 Channels) | 18 mA | 2 V | 10 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SO |
|
AD641ANZIC LOGARITHMIC 1 CIRCUIT 20DIP |
2,031 |
|
Datasheet | - | 20-DIP (0.300", 7.62mm) | Tube | Active | Logarithmic | 1 | - | - | - | 250 MHz | 7 µA | 50 µV | 35mA | 2.3 mA | 9 V | 15 V | -40°C ~ 85°C | - | - | Through Hole | 20-PDIP |
|
AD8542ARIC OPAMP GP R-R CMOS 1MHZ 8SOIC |
581 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 0.92V/µs | 1 MHz | - | 4 pA | 1 mV | 45µA (x2 Channels) | 30 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
AD8527ARZ-REEL7IC OPAMP GP R-R 7MHZ DUAL 8SOIC |
1,000 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 2 | Rail-to-Rail | 8V/µs | 7 MHz | - | 450 nA | 1.3 mV | 900µA (x2 Channels) | 10 mA | 1.8 V | 6 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
AT8091350MHZ CMOS RAIL TO RAIL OUTPUT |
2,941 |
|
Datasheet | - | - | Bulk | Active | Standard | 1 | Single Ended, Rail-to-Rail | 232V/µs | 195 MHz | 79 MHz | 1 pA | 2 mV | 4.2mA | 120 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | - | - |
|
|
AT821RAIL TO RAIL I/O CMOS OPERATIONA |
2,911 |
|
Datasheet | - | - | Bulk | Active | Standard | 1 | Single Ended, Rail-to-Rail | 10V/µs | 14 MHz | - | 1 pA | 600 µV | 1.9mA | 110 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | - | - |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
