Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LT1882MPS#PBFIC OPAMP GP 4 CIRCUIT 14SO |
1,244 |
|
Datasheet | LT® | 14-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 4 | Rail-to-Rail | 0.35V/µs | 1 MHz | - | 150 pA | 30 µV | 650µA (x4 Channels) | 40 mA | 2.7 V | 36 V | -55°C ~ 125°C | - | - | Surface Mount | 14-SO |
|
AD604ARSZIC VARIABLE GAIN 2 CIRC 24SSOP |
2,332 |
|
Datasheet | X-AMP® | 24-SSOP (0.209", 5.30mm Width) | Tube | Active | Variable Gain | 2 | - | 170V/µs | - | 40 MHz | 400 nA | 30 mV | 32mA | 40 mA | 5 V | 5 V | -40°C ~ 85°C | - | - | Surface Mount | 24-SSOP |
|
JM38510/13502BGAIC OPAMP GP 1 CIRCUIT TO99-8 |
3,415 |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | General Purpose | 1 | - | 0.8V/µs | - | - | - | - | - | 70 mA | 9 V | 40 V | -55°C ~ 125°C (TA) | Military | MIL-M-38510 | Through Hole | TO-99-8 |
|
AD526BDZIC OPAMP PGA 1 CIRCUIT 16CDIP |
1,454 |
|
Datasheet | - | 16-CDIP (0.300", 7.62mm) | Tube | Active | Programmable Gain | 1 | - | 24V/µs | - | 4 MHz | 50 pA | 250 µV | 10mA | 10 mA | 9 V | 33 V | -40°C ~ 85°C | - | - | Through Hole | 16-CDIP |
|
AD600JNZIC VARIABLE GAIN 2 CIRCUIT 16DIP |
4,750 |
|
Datasheet | X-AMP® | 16-DIP (0.300", 7.62mm) | Tube | Active | Variable Gain | 2 | - | 275V/µs | - | 35 MHz | 350 nA | - | 11mA (x2 Channels) | 50 mA | 9.5 V | 10.5 V | 0°C ~ 70°C | - | - | Through Hole | 16-PDIP |
|
AD640BEIC LOGARITHMIC 1 CIRCUIT 20CLCC |
1,220 |
|
Datasheet | - | 20-CLCC | Tube | Active | Logarithmic | 1 | - | - | - | 350 MHz | 7 µA | 50 µV | 35mA | 2.3 mA | 9 V | 15 V | -40°C ~ 85°C | - | - | Surface Mount | 20-CLCC (8.89x8.89) |
|
AD8229HDZIC INST AMP 1 CIRCUIT 8DIP |
2,508 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | Instrumentation | 1 | - | 22V/µs | - | 15 MHz | 70 nA | 100 µV | 6.7mA | 35 mA | 8 V | 34 V | -40°C ~ 210°C | - | - | Through Hole | 8-DIP |
|
LT6013ACS8#PBFIC OPAMP GP 1 CIRCUIT 8SO |
4,832 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | Rail-to-Rail | 0.2V/µs | 1.4 MHz | - | 100 pA | 20 µV | 200µA | 20 mA | 2.7 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
ADA4311-1ARHZ-R7IC OPAMP CFA 2 CIRCUIT 10MSOP |
2,721 |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) Exposed Pad | Tape & Reel (TR) | Active | Current Feedback | 2 | Differential | 1050V/µs | - | 310 MHz | 2 µA | 1 mV | 11.8mA | - | 6 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 10-MSOP-EP |
|
|
LT1812CS8#PBFIC VOLTAGE FEEDBACK 1 CIRC 8SO |
2,150 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Voltage Feedback | 1 | - | 750V/µs | 100 MHz | - | 900 nA | 400 µV | 3mA | 60 mA | 2.5 V | 12.6 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
