Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LTC6246IS6#TRPBFIC OPAMP GP 1 CIRCUIT TSOT23-6 |
2,767 |
|
Datasheet | - | SOT-23-6 Thin, TSOT-23-6 | Tape & Reel (TR) | Last Time Buy | General Purpose | 1 | Rail-to-Rail | 90V/µs | 180 MHz | 120 MHz | 400 nA | 100 µV | 1.25mA | - | 2.5 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | TSOT-23-6 |
|
OP481GSIC OPAMP GP R-R 105KHZ LP 14SOIC |
24,319 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 4 | Rail-to-Rail | 0.028V/µs | 105 kHz | - | 3 nA | 100 µV | 3.3µA (x4 Channels) | 12 mA | 2.7 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
AD845JR-16-REEL7IC OPAMP JFET 16MHZ PREC 16SOIC |
1,546 |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Bulk | Obsolete | J-FET | 1 | - | 100V/µs | 16 MHz | - | 750 pA | 700 µV | 10mA | 50 mA | 9.5 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
|
|
OP4177AR-REEL7IC OPAMP GP 4 CIRCUIT 14SOIC |
1,084 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 4 | - | 0.7V/µs | 1.3 MHz | - | 500 pA | 15 µV | 400µA (x4 Channels) | 10 mA | 5 V | 30 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SOIC |
|
AD8221ARIC INST AMP 1 CIRCUIT 8SOIC |
1,376 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Instrumentation | 1 | - | 2V/µs | - | 825 kHz | 500 pA | 60 µV | 900µA | 18 mA | 4.6 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
LT6200CS6-5#TRPBFIC BUFFER 1 CIRCUIT TSOT23-6 |
2,433 |
|
Datasheet | - | SOT-23-6 Thin, TSOT-23-6 | Tape & Reel (TR) | Active | Buffer | 1 | Rail-to-Rail | 250V/µs | 800 MHz | - | 23 µA | 2.5 mV | 20mA | 90 mA | 2.5 V | 12.6 V | 0°C ~ 70°C | - | - | Surface Mount | TSOT-23-6 |
|
AD627BNIC AMP INST R-R 25MA 8DIP |
594 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Instrumentation | 1 | Rail-to-Rail | 0.06V/µs | - | 80 kHz | 2 nA | 25 µV | 60µA | 25 mA | 2.2 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
LT2178AIS8#TRPBFIC OPAMP GP 2 CIRCUIT 8SO |
2,896 |
|
Datasheet | LT® | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 0.04V/µs | 85 kHz | - | 3 nA | 70 µV | 16µA (x2 Channels) | - | 2.2 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
|
AD745BQIC OPAMP JFET 1 CIRCUIT 8CERDIP |
1,145 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | J-FET | 1 | - | 12V/µs | 20 MHz | 20 MHz | 150 pA | 250 µV | 8mA | 40 mA | 9.6 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-CERDIP |
|
|
AD8610AR-REEL7IC OPAMP JFET 1 CIRCUIT 8SOIC |
1,897 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | J-FET | 1 | - | 60V/µs | 25 MHz | - | 3 pA | 85 µV | 3mA | 45 mA | 10 V | 26 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
