Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OP491GRU-REELIC OPAMP GP 4 CIRCUIT 14TSSOP |
4,213 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 4 | Rail-to-Rail | 0.5V/µs | 3 MHz | - | 30 nA | 80 µV | 260µA (x4 Channels) | 16 mA | 2.7 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
AD844JR-16-REEL7IC OPAMP CF 60MHZ 80MA 16SOIC |
372 |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Bulk | Obsolete | Current Feedback | 1 | - | 2000V/µs | - | 60 MHz | 200 pA | 50 µV | 6.5mA | 80 mA | 9 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
|
LTC6246CS6#TRMPBFIC OPAMP GP 1 CIRCUIT TSOT23-6 |
3,404 |
|
Datasheet | - | SOT-23-6 Thin, TSOT-23-6 | Tape & Reel (TR) | Last Time Buy | General Purpose | 1 | Rail-to-Rail | 90V/µs | 180 MHz | 120 MHz | 400 nA | 100 µV | 1.25mA | - | 2.5 V | 5.25 V | 0°C ~ 70°C | - | - | Surface Mount | TSOT-23-6 |
|
AD8015ARIC TRANSIMPEDANCE 1 CIRC 8SOIC |
4,302 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Transimpedance | 1 | Differential | - | 240 MHz | - | - | - | 25mA | - | 4.5 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
AD8651ARMZ-R2IC OPAMP VF CMOS 50MHZ LN 8MSOP |
2,382 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Cut Tape (CT) | Obsolete | Voltage Feedback | 1 | Rail-to-Rail | 41V/µs | 50 MHz | - | 1 pA | 100 µV | 9.5mA | 40 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MSOP |
|
LTC2050HS5#TRPBFIC OPAMP ZER-DRIFT 1CIR TSOT23-5 |
3,538 |
|
Datasheet | - | SOT-23-5 Thin, TSOT-23-5 | Tape & Reel (TR) | Active | Zero-Drift | 1 | Rail-to-Rail | 2V/µs | 3 MHz | - | 25 pA | 0.5 µV | 800µA | - | 2.7 V | 6 V | -40°C ~ 125°C | - | - | Surface Mount | TSOT-23-5 |
|
AD642JHIC OPAMP JFET 2 CIRCUIT TO99-8 |
29,133 |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | J-FET | 2 | - | 3V/µs | - | 50 kHz | 35 pA | 2 mV | - | 25 mA | - | - | 0°C ~ 70°C | - | - | Through Hole | TO-99-8 |
|
AD8010ANIC OPAMP CF 200MA LP 8DIP |
25,313 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Current Feedback | 1 | - | 800V/µs | - | 230 MHz | 10 µA | 5 mV | 15.5mA | 200 mA | 9 V | 12 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
AD8010AR-REEL7IC OPAMP CF 200MA LP 8SOIC |
8,944 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | Current Feedback | 1 | - | 800V/µs | - | 230 MHz | 10 µA | 5 mV | 15.5mA | 200 mA | 9 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
LTC2050HVIS8#TRPBFIC OPAMP ZERO-DRIFT 1 CIRC 8SO |
4,111 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Zero-Drift | 1 | Rail-to-Rail | 2V/µs | 3 MHz | - | 25 pA | 0.5 µV | 1mA | - | 2.7 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
