Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LTC6228HS6#TRPBFIC OPAMP GP 1 CIRCUIT TSOT23-6 |
4,758 |
|
Datasheet | - | SOT-23-6 Thin, TSOT-23-6 | Tape & Reel (TR) | Last Time Buy | General Purpose | 1 | Rail-to-Rail | 500V/µs | 890 MHz | 730 MHz | 16 µA | 20 µV | 16mA | 140 mA | 2.8 V | 11.75 V | -40°C ~ 125°C | - | - | Surface Mount | TSOT-23-6 |
|
OP191GSIC OPAMP GP 1 CIRCUIT 8SOIC |
3,494 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.5V/µs | 3 MHz | - | 30 nA | 80 µV | 260µA | 16 mA | 2.7 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
OP221GS-REELIC OPAMP GP DUAL LP 8SOIC |
4,695 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 2 | Single-Ended | 0.3V/µs | - | 600 kHz | 70 nA | 250 µV | 850µA (x2 Channels) | - | 5 V | 30 V | -55°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
AD8672ARIC OPAMP GP 2 CIRCUIT 8SOIC |
2,247 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | - | 4V/µs | 10 MHz | - | 3 nA | 20 µV | 3mA (x2 Channels) | 20 mA | 10 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
ADA4692-2ARZ-RLIC OPAMP GP 2 CIRCUIT 8SOIC |
2,454 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 1.3V/µs | 3.6 MHz | - | 0.5 pA | 500 µV | 180µA (x2 Channels) | 55 mA | 2.7 V | 5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
AD8052ARMIC VOLTAGE FEEDBACK 2 CIRC 8MSOP |
3,213 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Obsolete | Voltage Feedback | 2 | Rail-to-Rail | 170V/µs | 80 MHz | 110 MHz | 1.4 µA | 1.7 mV | 4.8mA (x2 Channels) | 45 mA | 3 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MSOP |
|
|
AD8062ARMIC VOLTAGE FEEDBACK 2 CIRC 8MSOP |
1,967 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Obsolete | Voltage Feedback | 2 | Rail-to-Rail | 650V/µs | - | 320 MHz | 3.5 µA | 1 mV | 6.8mA (x2 Channels) | 50 mA | 2.7 V | 8 V | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
|
|
AD8056ARM-REEL7IC VOLTAGE FEEDBACK 2 CIRC 8MSOP |
3,673 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Obsolete | Voltage Feedback | 2 | - | 1400V/µs | - | 300 MHz | 400 nA | 3 mV | 10mA | 60 mA | 8 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MSOP |
|
|
LT6011IS8#TRPBFIC OPAMP GP 2 CIRCUIT 8SO |
2,633 |
|
Datasheet | LT® | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 0.11V/µs | 350 kHz | - | 20 pA | 35 µV | 135µA (x2 Channels) | 20 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
|
AD8048ANZIC VOLTAGE FEEDBACK 1 CIRC 8DIP |
2,662 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Voltage Feedback | 1 | - | 1000V/µs | - | 260 MHz | 1 µA | 1 mV | 5.9mA | 50 mA | 6 V | 12 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
