Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AD8275ARMZ-R7IC OPAMP DIFF 1 CIRCUIT 8MSOP |
33,475 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Differential | 1 | Rail-to-Rail | 25V/µs | - | 15 MHz | - | 300 µV | 1.9mA | 30 mA | 3.3 V | 15 V | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
|
AD8652ARZIC CMOS 2 CIRCUIT 8SOIC |
12,114 |
|
Datasheet | DigiTrim® | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | CMOS | 2 | Rail-to-Rail | 41V/µs | 50 MHz | - | 1 pA | 90 µV | 17.5mA | 40 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
AD8065ARTZ-REEL7IC OPAMP VFB 1 CIRCUIT SOT23-5 |
10,530 |
|
Datasheet | FastFET™ | SC-74A, SOT-753 | Tape & Reel (TR) | Active | Voltage Feedback | 1 | Rail-to-Rail | 180V/µs | - | 145 MHz | 3 pA | 400 µV | 6.6mA | 30 mA | 5 V | 24 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
|
AD8065ARTZ-REELIC OPAMP VFB 1 CIRCUIT SOT23-5 |
8,484 |
|
Datasheet | FastFET™ | SC-74A, SOT-753 | Tape & Reel (TR) | Active | Voltage Feedback | 1 | Rail-to-Rail | 180V/µs | - | 145 MHz | 3 pA | 400 µV | 6.6mA | 30 mA | 5 V | 24 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
LTC6078IMS8#TRPBFIC CMOS 2 CIRCUIT 8MSOP |
10,763 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 0.05V/µs | 750 kHz | - | 0.2 pA | 25 µV | 55µA (x2 Channels) | 25 mA | 2.7 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
|
OP279GSZ-REEL7IC BUFFER 2 CIRCUIT 8SOIC |
7,362 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Buffer | 2 | Rail-to-Rail | 3V/µs | 5 MHz | - | 300 nA | 4 mV | - | 50 mA | 4.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
OP282ARMZ-REELIC OPAMP JFET 2 CIRCUIT 8MSOP |
6,000 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | J-FET | 2 | - | 9V/µs | 4 MHz | - | 3 pA | 200 µV | 210µA (x2 Channels) | 10 mA | 9 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
|
LT1782IS5#TRPBFIC OPAMP GP 1 CIRCUIT TSOT23-5 |
5,325 |
|
Datasheet | Over-The-Top® | SOT-23-5 Thin, TSOT-23-5 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 0.075V/µs | 225 kHz | - | 8 nA | 500 µV | 45µA | 30 mA | 2.5 V | 18 V | -40°C ~ 85°C | - | - | Surface Mount | TSOT-23-5 |
|
|
AD8009JRTZ-REEL7IC OPAMP CFA 1 CIRCUIT SOT23-5 |
1,632 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | Current Feedback | 1 | - | 5500V/µs | - | 845 MHz | 50 µA | 2 mV | 16mA | 175 mA | 5 V | 12 V | 0°C ~ 70°C | - | - | Surface Mount | SOT-23-5 |
|
|
LTC6078HMS8#PBFIC CMOS 2 CIRCUIT 8MSOP |
1,276 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Active | CMOS | 2 | Rail-to-Rail | 0.05V/µs | 750 kHz | - | 0.2 pA | 10 µV | 55µA (x2 Channels) | 25 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MSOP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
