Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AD8014ARIC OPAMP CFA 1 CIRCUIT 8SOIC |
2,194 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Current Feedback | 1 | - | 4600V/µs | - | 480 MHz | 5 µA | 2 mV | 1.15mA | 50 mA | 4.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
AD8569ARMZ-REELIC BUFFER AMP QUAD R-R 10-MSOP |
66,381 |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Bulk | Obsolete | Buffer | 4 | Rail-to-Rail | 6V/µs | - | 6 MHz | 80 nA | 2 mV | 700µA (x2 Channels) | - | 4.5 V | 16 V | -40°C ~ 85°C | - | - | Surface Mount | 10-MSOP |
|
|
AD8592ARM-REELIC OPAMP GP R-R CMOS 3MHZ 10MSOP |
2,987 |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Cut Tape (CT) | Obsolete | General Purpose | 2 | Rail-to-Rail | 5V/µs | 3 MHz | - | 5 pA | 2 mV | - | 250 mA | 2.5 V | 6 V | -40°C ~ 85°C | - | - | Surface Mount | 10-MSOP |
|
AD8007AKS-REEL7IC OPAMP CF ULDIST LN LP SC70-5 |
3,351 |
|
Datasheet | - | 5-TSSOP, SC-70-5, SOT-353 | Cut Tape (CT) | Obsolete | Current Feedback | 1 | - | 1000V/µs | - | 650 MHz | 4 µA | 500 µV | 9mA | 130 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SC-70-5 |
|
|
AD8569ARM-REELIC BUFFER AMP QUAD R-R 10-MSOP |
25,381 |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Bulk | Obsolete | Buffer | 4 | Rail-to-Rail | 6V/µs | - | 6 MHz | 80 nA | 2 mV | 700µA (x2 Channels) | - | 4.5 V | 16 V | -40°C ~ 85°C | - | - | Surface Mount | 10-MSOP |
|
|
AD8007AKS-REELIC OPAMP CF ULDIST LN LP SC70-5 |
20,000 |
|
Datasheet | - | 5-TSSOP, SC-70-5, SOT-353 | Bulk | Obsolete | Current Feedback | 1 | - | 1000V/µs | - | 650 MHz | 4 µA | 500 µV | 9mA | 130 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SC-70-5 |
|
AD8571ARM-R2IC OPAMP CHOPPER R-R 30MA 8MSOP |
972 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Bulk | Obsolete | Chopper (Zero-Drift) | 1 | Rail-to-Rail | 0.4V/µs | 1.5 MHz | - | 10 pA | 1 µV | 850µA | 30 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MSOP |
|
LTC2057HS8#TRPBFIC OPAMP ZER-DRIFT 1CIRC 8SO |
2,931 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Zero-Drift | 1 | Rail-to-Rail | 0.45V/µs | 1.5 MHz | - | 30 pA | 0.5 µV | 900µA | - | 4.75 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SO |
|
|
LTC2050IS8#TRPBFIC OPAMP ZERO-DRIFT 1 CIRC 8SO |
2,075 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Zero-Drift | 1 | Rail-to-Rail | 2V/µs | 3 MHz | - | 75 pA | 0.5 µV | 800µA | - | 2.7 V | 6 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
|
|
AD8033AR-REEL7IC OPAMP VF R-R LN LP 60MA 8SOIC |
3,114 |
|
Datasheet | FastFET™ | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | Voltage Feedback | 1 | Rail-to-Rail | 80V/µs | - | 80 MHz | 1.5 pA | 1 mV | 3.3mA | 60 mA | 5 V | 24 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
