Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LT6010ACDD#PBFIC OPAMP GP 1 CIRCUIT 8DFN |
1,999 |
|
Datasheet | - | 8-WFDFN Exposed Pad | Tube | Active | General Purpose | 1 | Rail-to-Rail | 0.11V/µs | 350 kHz | - | 2 nA | 20 µV | 260µA | 20 mA | 2.7 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-DFN (3x3) |
|
LT1996ACDD#PBFIC OPAMP PGA 1 CIRCUIT 10DFN |
7,502 |
|
Datasheet | - | 10-WFDFN Exposed Pad | Tube | Active | Programmable Gain | 1 | Rail-to-Rail | 0.12V/µs | 560 kHz | 38 kHz | 2.5 nA | 15 µV | 130µA | 21 mA | 2.7 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 10-DFN (3x3) |
|
|
LTC6229IDD#TRPBFIC OPAMP GP 1 CIRCUIT 10DFN |
4,636 |
|
Datasheet | - | 10-WFDFN Exposed Pad | Tape & Reel (TR) | Last Time Buy | General Purpose | 1 | Rail-to-Rail | 500V/µs | 890 MHz | 730 MHz | 16 µA | 20 µV | 16mA | 140 mA | 2.8 V | 11.75 V | -40°C ~ 85°C | - | - | Surface Mount | 10-DFN (3x3) |
|
LTC6227IMS8E#PBFIC OPAMP GP 2 CIRCUIT 8MSOP |
291 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tube | Last Time Buy | General Purpose | 2 | Rail-to-Rail | 180V/µs | 420 MHz | 330 MHz | 8.4 µA | 20 µV | 5.5mA (x2 Channels) | 64 mA | 2.8 V | 11.75 V | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP-EP |
|
ADA4620-2ARZ36V JFET PRECISION AMPLIFIER |
114 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Standard | 2 | Single Ended, Rail-to-Rail | 34V/µs | 16 MHz | 51 MHz | 0.8 pA | 30 µV | 1.3mA (x2 Channels) | 94 mA | 4.5 V | 36 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOIC |
|
ADA4000-4ARUZ-RLIC OPAMP JFET 4 CIRCUIT 14TSSOP |
2,362 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | J-FET | 4 | - | 20V/µs | 5 MHz | - | 5 pA | 200 µV | 1.35mA (x4 Channels) | 28 mA | 8 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
|
LT6211CDD#PBFIC OPAMP CFA 2 CIRCUIT 10DFN |
2,374 |
|
Datasheet | LT® | 10-WFDFN Exposed Pad | Tube | Active | Current Feedback | 2 | Rail-to-Rail | 700V/µs | - | 200 MHz | 13.5 µA | 1 mV | 5.8mA (x2 Channels) | 75 mA | 3 V | 12 V | 0°C ~ 70°C | - | - | Surface Mount | 10-DFN (3x3) |
|
LTC1050CN#PBFIC OPAMP ZERO-DRIFT 1 CIRC 14DIP |
173 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Active | Zero-Drift | 1 | - | 4V/µs | 2.5 MHz | - | 10 pA | 0.5 µV | 1mA | - | 4.75 V | 16 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
|
AD8664ARUZ-REELIC CMOS 4 CIRCUIT 14TSSOP |
2,612 |
|
Datasheet | DigiTrim® | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | Rail-to-Rail | 3.5V/µs | 4 MHz | - | 0.3 pA | 50 µV | 1.25mA (x4 Channels) | 140 mA | 5 V | 16 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
AD8209WHRMZIC OPAMP DIFF 1 CIRCUIT 8MSOP |
150 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Active | Differential | 1 | - | 1V/µs | 80 kHz | - | 50 nA | 2 mV | 1.6mA | - | 4.5 V | 5.5 V | -40°C ~ 150°C | Automotive | - | Surface Mount | 8-MSOP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
