Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AD783JQIC SAMPL/HOLD 1 CIRCUIT 8CERDIP |
4,470 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Tube | Active | Sample and Hold | 1 | - | - | - | 15 MHz | 100 nA | - | 9.5mA | 5 mA | 9.5 V | 10.5 V | 0°C ~ 70°C | - | - | Through Hole | 8-CERDIP |
|
AD606JNZIC LOGARITHMIC 1 CIRCUIT 16DIP |
3,778 |
|
Datasheet | - | 16-DIP (0.300", 7.62mm) | Tube | Active | Logarithmic | 1 | Differential | - | - | - | 4 µA | - | 13mA | 1.2 mA | 4.5 V | 5.5 V | 0°C ~ 70°C | - | - | Through Hole | 16-PDIP |
|
|
JM38510/11402BPAIC OPAMP JFET 1 CIRCUIT 8CERDIP |
1,431 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Tube | Active | J-FET | 1 | - | 7.5V/µs | - | - | 100 pA | 5 mV | - | 50 mA | 10 V | 40 V | -55°C ~ 125°C | Military | MIL-M-38510/114 | Through Hole | 8-CERDIP |
|
5962-89801012AIC OPAMP GP 4 CIRCUIT 20CLCC |
321 |
|
Datasheet | - | 20-CLCC | Bulk | Active | General Purpose | 4 | - | 1V/µs | 3 MHz | - | 180 nA | 300 µV | - | - | 10 V | 30 V | -55°C ~ 125°C | - | - | Surface Mount | 20-CLCC (9x9) |
|
AD521SD/883BIC INST AMP 1 CIRCUIT 14CDIP |
1,022 |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Bulk | Not For New Designs | Instrumentation | 1 | - | 10V/µs | - | 2 MHz | 80 nA | 3 mV | 5mA | - | 10 V | 36 V | -55°C ~ 125°C | - | - | Through Hole | 14-CDIP |
|
|
AD585SEIC SAMPL/HOLD 1 CIRCUIT 20CLCC |
4,381 |
|
Datasheet | - | 20-CLCC | Bulk | Active | Sample and Hold | 1 | - | 10V/µs | - | 2 MHz | 2 nA | 2 mV | 10mA | 50 mA | 10 V | 36 V | -55°C ~ 125°C | - | - | Surface Mount | 20-CLCC (8.89x8.89) |
|
AD684AQIC SAMPL/HOLD 4 CIRCUIT 16CERDIP |
3,644 |
|
Datasheet | - | 16-CDIP (0.300", 7.62mm) | Tube | Active | Sample and Hold | 4 | - | - | - | 4 MHz | 100 nA | - | 18mA | 5 mA | 21.6 V | 26.4 V | -40°C ~ 85°C | - | - | Through Hole | 16-CERDIP |
|
AD8229HRZIC INST AMP 1 CIRCUIT 8SOIC |
1,839 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Instrumentation | 1 | - | 22V/µs | - | 15 MHz | 70 nA | 100 µV | 6.7mA | 35 mA | 8 V | 34 V | -40°C ~ 175°C | - | - | Surface Mount | 8-SOIC |
|
|
AD640TE/883BIC LOGARITHMIC 1 CIRCUIT 20LCC |
4,287 |
|
Datasheet | - | 20-CLCC | Tube | Active | Logarithmic | 1 | - | - | - | 350 MHz | 7 µA | 50 µV | 35mA | 2.3 mA | 9 V | 15 V | -55°C ~ 125°C | - | - | Surface Mount | 20-CLCC (9x9) |
|
AD8648WARUZQUAD, 24MHZ, RRIO, 5V OP AMP |
3,051 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tube | Active | General Purpose | 4 | Rail-to-Rail | 11V/µs | 24 MHz | - | 0.3 pA | 600 µV | 1.5mA (x4 Channels) | 120 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
