Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LTC6911HMS-1#PBFIC OPAMP PGA 2 CIRCUIT 10MSOP |
149 |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tube | Active | Programmable Gain | 2 | Rail-to-Rail | 16V/µs | 11 MHz | - | - | 2 mV | 3.1mA (x2 Channels) | 35 mA | 2.7 V | 10.5 V | -40°C ~ 125°C | - | - | Surface Mount | 10-MSOP |
|
|
LTC6911HMS-2#PBFIC OPAMP PGA 2 CIRCUIT 10MSOP |
3,883 |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tube | Active | Programmable Gain | 2 | Rail-to-Rail | 16V/µs | 11 MHz | - | - | 2 mV | 3.1mA (x2 Channels) | 35 mA | 2.7 V | 10.5 V | -40°C ~ 125°C | - | - | Surface Mount | 10-MSOP |
|
LT1814IGN#PBFIC OPAMP VFB 4 CIRCUIT 16SSOP |
1,355 |
|
Datasheet | LT® | 16-SSOP (0.154", 3.90mm Width) | Tube | Active | Voltage Feedback | 4 | - | 750V/µs | 100 MHz | 200 MHz | 900 nA | 500 µV | 3mA (x4 Channels) | 60 mA | 2.5 V | 12.6 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SSOP |
|
OP496HRUZ-REELIC CMOS 4 CIRCUIT 14TSSOP |
2,649 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | Rail-to-Rail | 0.3V/µs | 450 kHz | - | 10 nA | 35 µV | - | 4 mA | 3 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
AD8476BCPZ-R7IC OPAMP DIFF 1 CIRCUIT 16LFCSP |
935 |
|
Datasheet | - | 16-WFQFN Exposed Pad, CSP | Tape & Reel (TR) | Active | Differential | 1 | Differential, Rail-to-Rail | 10V/µs | - | 5 MHz | - | - | 330µA | 35 mA | 3 V | 18 V | -40°C ~ 125°C | - | - | Surface Mount | 16-LFCSP-WQ (3x3) |
|
ADA4004-2ARZ-RLIC OPAMP GP 2 CIRCUIT 8SOIC |
4,692 |
|
Datasheet | iPolar® | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | - | 2.7V/µs | 12 MHz | - | 40 nA | 40 µV | - | 10 mA | 10 V | 30 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
AD8205WHRZIC OPAMP DIFF 1 CIRCUIT 8SOIC |
2,903 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Differential | 1 | - | 0.5V/µs | - | 50 kHz | - | 2 mV | 2.2mA | - | 4.5 V | 5.5 V | -40°C ~ 150°C | Automotive | - | Surface Mount | 8-SOIC |
|
LT1399CS#PBFIC OPAMP CFA 3 CIRCUIT 16SO |
139 |
|
Datasheet | LT® | 16-SOIC (0.154", 3.90mm Width) | Tube | Active | Current Feedback | 3 | - | 800V/µs | 300 MHz | 300 MHz | 10 µA | 1.5 mV | 4.6mA (x3 Channels) | 80 mA | 4 V | 12 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SO |
|
AD8133ACPZ-REEL7IC OPAMP DIFF 3 CIRCUIT 24LFCSP |
2,188 |
|
Datasheet | - | 24-WFQFN Exposed Pad, CSP | Tape & Reel (TR) | Active | Differential | 3 | Differential | 1600V/µs | - | 450 MHz | 67 µA | 6 mV | 28mA | 90 mA | 4.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 24-LFCSP-WQ (4x4) |
|
ADA4254ARUZ-R7IC OPAMP ZER-DRIFT 1CIRC 24TSSOP |
2,792 |
|
Datasheet | - | 24-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | Zero-Drift | 1 | Differential | 1.9V/µs | - | 2.3 MHz | 450 pA | 3 µV | - | 11 mA | 10 V | 56 V | -40°C ~ 105°C | - | - | Surface Mount | 24-TSSOP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
