Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ADA4861-3YRZIC OPAMP CFA 3 CIRCUIT 14SOIC |
211 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Active | Current Feedback | 3 | - | 680V/µs | - | 370 MHz | 2.9 µA | 100 µV | 17.9mA | 100 mA | 5 V | 12 V | -40°C ~ 105°C | - | - | Surface Mount | 14-SOIC |
|
LT6004CMS8#TRPBFIC OPAMP GP 2 CIRCUIT 8MSOP |
1,160 |
|
Datasheet | LT® | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 0.0055V/µs | 3 kHz | - | 7 pA | 80 µV | 1.25µA (x2 Channels) | 9 mA | 1.6 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 8-MSOP |
|
AD8063ARZ-REEL7IC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
883 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 1 | Rail-to-Rail | 650V/µs | - | 320 MHz | 3.5 µA | 1 mV | 6.8mA | 50 mA | 2.7 V | 8 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
LT6004CDD#PBFIC OPAMP GP 2 CIRCUIT 8DFN |
320 |
|
Datasheet | LT® | 8-WFDFN Exposed Pad | Tube | Active | General Purpose | 2 | Rail-to-Rail | 0.0055V/µs | 3 kHz | - | 7 pA | 80 µV | 1.25µA (x2 Channels) | 9 mA | 1.6 V | 16 V | 0°C ~ 85°C | - | - | Surface Mount | 8-DFN (3x3) |
|
|
AD8061ARZ-REEL7IC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
219 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 1 | Rail-to-Rail | 650V/µs | - | 320 MHz | 3.5 µA | 1 mV | 6.8mA | 50 mA | 2.7 V | 8 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
ADA4862-3YRZ-RL7IC OPAMP GP 3 CIRCUIT 14SOIC |
1,000 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 3 | - | 1050V/µs | - | 720 MHz | 600 nA | 2 mV | 17.9mA | 115 mA | 5 V | 12 V | -40°C ~ 105°C | - | - | Surface Mount | 14-SOIC |
|
ADA4830-2WBCPZ-R7IC OPAMP DIFF 2 CIRCUIT 16LFCSP |
4,025 |
|
Datasheet | - | 16-WFQFN Exposed Pad, CSP | Tape & Reel (TR) | Active | Differential | 2 | - | 220V/µs | - | 84 MHz | - | - | 6.8mA (x2 Channels) | 125 mA | 2.9 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 16-LFCSP (3x3) |
|
ADA4310-1ACPZ-R7IC OPAMP CFA 2 CIRCUIT 16LFCSP |
1,064 |
|
Datasheet | - | 16-WQFN Exposed Pad, CSP | Tape & Reel (TR) | Active | Current Feedback | 2 | - | 820V/µs | - | 190 MHz | 6 µA | 1 mV | 7.6mA (x2 Channels) | - | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 16-LFCSP (4x4) |
|
AD8274ARMZIC OPAMP DIFF 1 CIRCUIT 8MSOP |
511 |
|
Datasheet | iPolar® | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Active | Programmable Gain | 1 | Single-Ended | 20V/µs | 20 MHz | - | - | 300 µV | 2.3mA | 90 mA | 5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
|
LT1395CS6#TRMPBFIC OPAMP CFA 1 CIRCUIT TSOT23-6 |
952 |
|
Datasheet | - | SOT-23-6 | Tape & Reel (TR) | Active | Current Feedback | 1 | - | 800V/µs | - | 400 MHz | 10 µA | 1 mV | 4.6mA | 80 mA | 4 V | 12 V | 0°C ~ 70°C | - | - | Surface Mount | TSOT-23-6 |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
