Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ADA4097-2BRMZDUAL PRECISION, MICRO-POWER OTT |
177 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Active | Voltage Feedback | 2 | Rail-to-Rail | 0.1V/µs | 130 kHz | - | 100 pA | 20 µV | 42µA (x2 Channels) | 45 mA | 3 V | 50 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-MSOP |
|
LT6238CGN#PBFIC OPAMP GP 4 CIRCUIT 16SSOP |
486 |
|
Datasheet | LT® | 16-SSOP (0.154", 3.90mm Width) | Tube | Active | General Purpose | 4 | Rail-to-Rail | 70V/µs | 215 MHz | 90 MHz | 5 µA | 350 µV | 3.15mA (x4 Channels) | 30 mA | 3 V | 12.6 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SSOP |
|
LTC6244HVHDD#PBFIC CMOS 2 CIRCUIT 8DFN |
355 |
|
Datasheet | - | 8-WFDFN Exposed Pad | Tube | Active | CMOS | 2 | Rail-to-Rail | 40V/µs | 50 MHz | - | 1 pA | 100 µV | 6.25mA (x2 Channels) | 35 mA | 2.8 V | 5.25 V | -40°C ~ 125°C | - | - | Surface Mount | 8-DFN (3x3) |
|
LTC6253CTS8#TRMPBFIC OPAMP GP 2 CIRCUIT TSOT23-8 |
1,777 |
|
Datasheet | - | SOT-23-8 Thin, TSOT-23-8 | Tape & Reel (TR) | Last Time Buy | General Purpose | 2 | Rail-to-Rail | 280V/µs | 720 MHz | 400 MHz | 1.4 µA | 100 µV | 4.25mA (x2 Channels) | 100 mA | 2.5 V | 5.25 V | 0°C ~ 70°C | - | - | Surface Mount | TSOT-23-8 |
|
LT1413CN8#PBFIC OPAMP GP 2 CIRCUIT 8DIP |
415 |
|
Datasheet | LT® | 8-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 2 | - | 0.4V/µs | 950 kHz | - | 8 nA | 90 µV | 350µA (x2 Channels) | - | 2.85 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
LT1490IN8#PBFIC OPAMP GP 2 CIRCUIT 8DIP |
2,832 |
|
Datasheet | LT® | 8-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 2 | Rail-to-Rail | 0.07V/µs | 200 kHz | - | 4 nA | 250 µV | 40µA (x2 Channels) | 25 mA | 2 V | 44 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
LTC6241HVIDD#TRPBFIC CMOS 2 CIRCUIT 8DFN |
7,894 |
|
Datasheet | - | 8-WFDFN Exposed Pad | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 10V/µs | 18 MHz | - | 0.5 pA | 100 µV | 2.5mA (x2 Channels) | 30 mA | 2.8 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 8-DFN (3x3) |
|
LTC6241HVHS8#PBFIC CMOS 2 CIRCUIT 8SO |
197 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | CMOS | 2 | Rail-to-Rail | 10V/µs | 18 MHz | - | 0.5 pA | 50 µV | 2.5mA (x2 Channels) | 30 mA | 2.8 V | 11 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SO |
|
|
LT6221IS8#PBFIC OPAMP GP 2 CIRCUIT 8SO |
10,203 |
|
Datasheet | LT® | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 2 | Rail-to-Rail | 20V/µs | 60 MHz | - | 250 nA | 700 µV | 900µA (x2 Channels) | 50 mA | 2.2 V | 12.6 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
|
AD8627AKSZ-R2IC OPAMP JFET 1 CIRCUIT SC70-5 |
879 |
|
Datasheet | - | 5-TSSOP, SC-70-5, SOT-353 | Tape & Reel (TR) | Active | J-FET | 1 | Rail-to-Rail | 5V/µs | 5 MHz | - | 0.25 pA | 350 µV | 710µA | 15 mA | 5 V | 26 V | -40°C ~ 85°C | - | - | Surface Mount | SC-70-5 |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
