Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LT1359CS14#PBFIC VOLTAGE FEEDBACK 4 CIRC 14SO |
1,694 |
|
Datasheet | LT® | 14-SOIC (0.154", 3.90mm Width) | Tube | Active | Voltage Feedback | 4 | - | 600V/µs | 25 MHz | - | 120 nA | 200 µV | 2mA (x4 Channels) | 30 mA | 5 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SO |
|
AD629BNZIC OPAMP DIFF 1 CIRCUIT 8DIP |
178 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | Current Sense | 1 | - | 2.1V/µs | - | 500 kHz | - | 100 µV | 900µA | 25 mA | 5 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
LT1167AIS8-1#PBFIC INST AMP 1 CIRCUIT 8SO |
2,423 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Instrumentation | 1 | - | 1.2V/µs | 1 MHz | - | 50 pA | 15 µV | 900µA | - | 4.6 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
|
LT1362CS#PBFIC VOLTAGE FEEDBACK 4 CIRC 16SO |
330 |
|
Datasheet | LT® | 16-SOIC (0.154", 3.90mm Width) | Tube | Active | Voltage Feedback | 4 | - | 800V/µs | 50 MHz | - | 300 nA | 300 µV | 4mA (x4 Channels) | 34 mA | 5 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SO |
|
AMP02FSZIC INST AMP 1 CIRCUIT 16SOIC |
2,521 |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tube | Active | Instrumentation | 1 | - | 6V/µs | - | 1.2 MHz | 4 nA | 40 µV | 5mA | 32 mA | 9 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
|
|
AD827JNZIC OPAMP GP 2 CIRCUIT 8DIP |
579 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 2 | - | 300V/µs | 50 MHz | - | 3.3 µA | 300 µV | 10mA | 32 mA | 9 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
LT1210IR#PBFIC OPAMP CFA 1 CIRCUIT 7DDPAK |
175 |
|
Datasheet | - | TO-263-8, D2PAK (7 Leads + Tab), TO-263CA | Tube | Active | Current Feedback | 1 | - | 900V/µs | - | 35 MHz | - | 3 mV | 50mA | 2 A | 10 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | DDPAK-7 |
|
|
AD797ANZIC OPAMP GP 1 CIRCUIT 8DIP |
1,781 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 1 | - | 20V/µs | 110 MHz | 8 MHz | 250 nA | 25 µV | 8.2mA | 50 mA | 10 V | 30 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
AD743JRZ-16IC OPAMP JFET 1 CIRCUIT 16SOIC |
187 |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tube | Active | J-FET | 1 | - | 2.8V/µs | - | 4.5 MHz | 250 pA | 250 µV | 8.1mA | 40 mA | 9.6 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
|
|
AD621ANZIC INST AMP 1 CIRCUIT 8DIP |
143 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | Instrumentation | 1 | - | 1.2V/µs | - | 800 kHz | 500 pA | 75 µV | 900µA | 18 mA | 4.6 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
