Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OP200GSZIC OPAMP GP 2 CIRCUIT 16SOIC |
853 |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tube | Active | General Purpose | 2 | - | 0.15V/µs | 500 kHz | - | 100 pA | 80 µV | 570µA (x2 Channels) | - | 6 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
|
OP482GPZIC OPAMP JFET 4 CIRCUIT 14DIP |
776 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Active | J-FET | 4 | - | 9V/µs | 4 MHz | - | 3 pA | 200 µV | 210µA (x4 Channels) | 10 mA | 9 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
LT1012IS8#PBFIC OPAMP GP 1 CIRCUIT 8SO |
262 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | - | 0.2V/µs | - | - | 25 pA | 8 µV | 380µA | - | 2.4 V | 40 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
|
AD8015ARZIC TRANSIMPEDANCE 1 CIRC 8SOIC |
2,640 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Transimpedance | 1 | Differential | - | 240 MHz | - | - | - | 25mA | - | 4.5 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
LT1787HVIS8#TRPBFIC CURRENT SENSE 1 CIRCUIT 8SO |
1,470 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | - | - | - | - | - | 40 µV | 60µA | 50 µA | 2.5 V | 60 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
|
ADA4099-2HRZDUAL PRECISION 10MHZ, 7V/US OTT |
137 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 2 | Rail-to-Rail | 5.5V/µs | 8 MHz | - | 4 nA | 12 µV | 1.65mA | 50 mA | 3.15 V | 50 V | -55°C ~ 150°C | - | - | Surface Mount | 8-SOIC |
|
|
ADA4098-2HRZDUAL PRECISION, 1MHZ, 1V/US OTT |
107 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 2 | Rail-to-Rail | 0.85V/µs | 1.05 MHz | - | 350 pA | 15 µV | 165µA (x2 Channels) | 40 mA | 3 V | 50 V | -55°C ~ 150°C | - | - | Surface Mount | 8-SOIC |
|
|
AD8422BRZIC INST AMP 1 CIRCUIT 8SOIC |
464 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Instrumentation | 1 | Rail-to-Rail | 0.8V/µs | - | 2.2 MHz | 200 pA | 25 µV | 300µA | 20 mA | 4.6 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
LT1358CN8#PBFIC VOLTAGE FEEDBACK 2 CIRC 8DIP |
202 |
|
Datasheet | LT® | 8-DIP (0.300", 7.62mm) | Tube | Active | Voltage Feedback | 2 | - | 600V/µs | 25 MHz | - | 120 nA | 200 µV | 2mA (x2 Channels) | 30 mA | 5 V | 30 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
LT6232IGN#PBFIC OPAMP GP 4 CIRCUIT 16SSOP |
4,074 |
|
Datasheet | LT® | 16-SSOP (0.154", 3.90mm Width) | Tube | Active | General Purpose | 4 | Rail-to-Rail | 70V/µs | 215 MHz | - | 5 µA | 350 µV | 3.3mA (x4 Channels) | 30 mA | 3 V | 12.6 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SSOP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
