Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AD8057ARZIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
898 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Voltage Feedback | 1 | - | 1150V/µs | - | 325 MHz | 500 nA | 1 mV | 6mA | - | 3 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
LTC6241IS8#PBFIC CMOS 2 CIRCUIT 8SO |
3,918 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | CMOS | 2 | Rail-to-Rail | 10V/µs | 18 MHz | - | 0.5 pA | 100 µV | 2.5mA (x2 Channels) | 30 mA | 2.8 V | 6 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
|
|
AD8418WBRZ-RLIC CURRENT SENSE 1 CIRCUIT 8SOIC |
11,176 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | - | 1V/µs | - | 250 kHz | - | 200 µV | 2.6mA | - | 2.7 V | 5.5 V | -40°C ~ 125°C | Automotive | - | Surface Mount | 8-SOIC |
|
|
AD8276ARZIC OPAMP DIFF 1 CIRCUIT 8SOIC |
1,099 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Differential | 1 | Rail-to-Rail | 1.1V/µs | 550 kHz | - | - | 100 µV | 200µA | 15 mA | 2 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
LT1812CS5#TRMPBFIC OPAMP VFB 1 CIRCUIT TSOT23-5 |
2,973 |
|
Datasheet | - | SOT-23-5 Thin, TSOT-23-5 | Tape & Reel (TR) | Active | Voltage Feedback | 1 | - | 750V/µs | 100 MHz | - | 900 nA | 400 µV | 3mA | - | 2.5 V | 12.6 V | 0°C ~ 70°C | - | - | Surface Mount | TSOT-23-5 |
|
LTC2063ISC6#TRMPBFIC OPAMP ZERO-DRIFT 1CIRC SC70-6 |
22,943 |
|
Datasheet | - | 6-TSSOP, SC-88, SOT-363 | Tape & Reel (TR) | Active | Zero-Drift | 1 | Rail-to-Rail | 0.0035V/µs | 20 kHz | - | 3 pA | 1 µV | 1.4µA | - | 1.7 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | SC-70-6 |
|
|
AD8551ARZIC OPAMP ZERO-DRIFT 1 CIRC 8SOIC |
17,438 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Zero-Drift | 1 | Rail-to-Rail | 0.4V/µs | 1.5 MHz | - | 10 pA | 1 µV | 850µA | 30 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
AD8055ARZ-REEL7IC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
2,853 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 1 | - | 1400V/µs | - | 300 MHz | 400 nA | 3 mV | 5.4mA | 60 mA | 8 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
AD8055ARZIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
765 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Voltage Feedback | 1 | - | 1400V/µs | - | 300 MHz | 400 nA | 3 mV | 5.4mA | 60 mA | 8 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
AD8666ARMZ-REELIC OPAMP GP 2 CIRCUIT 8MSOP |
3,834 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 3.5V/µs | 4 MHz | - | 0.2 pA | 600 µV | 1.15mA (x2 Channels) | 140 mA | 5 V | 16 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MSOP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
