Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
RS8414XPIC CMOS 4 CIRCUIT 14SOIC |
3,720 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Cut Tape (CT) | Active | CMOS | 4 | Rail-to-Rail | 0.67V/µs | 1.2 MHz | - | 1 pA | 1.5 mV | 150µA (x4 Channels) | 70 mA | 3 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SOIC |
|
RS8452XKIC CMOS 2 CIRCUIT 8SOIC |
1,182 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Cut Tape (CT) | Active | CMOS | 2 | Rail-to-Rail | 5V/µs | 8 MHz | - | 1 pA | 1.5 mV | 3mA (x2 Channels) | 150 mA | 5 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
RS8524XQIC CMOS 4 CIRCUIT 14TSSOP |
11,119 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | Rail-to-Rail | 0.17V/µs | 350 kHz | - | 1 pA | 1.5 µV | 60µA (x4 Channels) | 25 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
RS8561XFIC CMOS 1 CIRCUIT SOT23-5 |
7,017 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | CMOS | 1 | Rail-to-Rail | 8.5V/µs | 11 MHz | - | 1 pA | 1.5 µV | 1.3mA | 65 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
RS8754XPIC CMOS 4 CIRCUIT 14SOIC |
7,724 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | Rail-to-Rail | 180V/µs | 250 MHz | - | 1 pA | 1.5 mV | 2.9mA (x4 Channels) | 125 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SOIC |
|
RS8558XKIC CMOS 2 CIRCUIT 8SOIC |
6,576 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 2.5V/µs | 4.3 MHz | - | 1 pA | 1.5 µV | 650µA (x2 Channels) | 48 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
RS8551XFIC CMOS 1 CIRCUIT SOT23-5 |
2,808 |
|
Datasheet | - | SC-74A, SOT-753 | Cut Tape (CT) | Active | CMOS | 1 | Rail-to-Rail | 2.7V/µs | 4.5 MHz | - | 1 pA | 1.5 µV | 640µA | 50 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
RS8559XPIC CMOS 4 CIRCUIT 14SOIC |
3,731 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Cut Tape (CT) | Active | CMOS | 4 | Rail-to-Rail | 2.5V/µs | 4.3 MHz | - | 1 pA | 1.5 µV | 650µA (x4 Channels) | 48 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SOIC |
|
RS8552XKIC CMOS 2 CIRCUIT 8SOIC |
7,733 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Cut Tape (CT) | Active | CMOS | 2 | Rail-to-Rail | 2.7V/µs | 4.5 MHz | - | 1 pA | 1.5 µV | 640µA (x2 Channels) | 50 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
RS8554XPIC CMOS 4 CIRCUIT 14SOIC |
7,741 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Cut Tape (CT) | Active | CMOS | 4 | Rail-to-Rail | 2.7V/µs | 4.5 MHz | - | 1 pA | 1.5 µV | 640µA (x4 Channels) | 50 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
