Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
BD7282YFVM-CTRNANO CAP TRADE;, AUTOMOTIVE LOW |
3,000 |
|
Datasheet | Nano Cap™ | 8-VSSOP, 8-MSOP (0.110", 2.80mm Width) | Tape & Reel (TR) | Active | Standard | 2 | Push-Pull, Rail-to-Rail | 10V/µs | 7 MHz | - | 0.5 pA | 10 µV | 1.7mA (x2 Channels) | 50 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-MSOP |
|
|
BD7282YFJ-CE2NANO CAPTRADE;, AUTOMOTIVE LOW N |
2,500 |
|
Datasheet | Nano Cap™ | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Standard | 2 | Push-Pull, Rail-to-Rail | 10V/µs | 7 MHz | - | 0.5 pA | 10 µV | 1.7mA (x2 Channels) | 50 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-SOP-J |
|
BU7475HFV-TRIC OPAMP GP 1 CIRCUIT 5HVSOF |
5,997 |
|
Datasheet | - | SOT-665 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 0.05V/µs | 100 kHz | - | 1 pA | 1 mV | 9µA | 14 mA | 1.7 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 5-HVSOF |
|
|
LM2902EYFV-CE2EMARMOUR, AUTOMOTIVE EXCE |
2,340 |
|
Datasheet | - | 14-LSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | Standard | 4 | Push-Pull | 0.2V/µs | 500 kHz | - | 20 nA | 2 mV | 250µA (x4 Channels) | 30 mA | 3 V | 36 V | -40°C ~ 150°C | Automotive | AEC-Q100 | Surface Mount | 14-SSOPB |
|
BU7294SFV-E2IC CMOS 4 CIRCUIT 14SSOPB |
2,500 |
|
Datasheet | - | 14-LSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | Rail-to-Rail | 3V/µs | 2.8 MHz | - | 1 pA | 1 mV | 2mA | 16 mA | 2.4 V | 5.5 V | -40°C ~ 105°C | - | - | Surface Mount | 14-SSOP-B |
|
BA3404F-E2IC OPAMP GP 2 CIRCUIT 8SOP |
2,496 |
|
Datasheet | - | 8-SOIC (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Push-Pull | 1.2V/µs | 1.2 MHz | - | 70 nA | 2 mV | 2mA | 30 mA | 4 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOP |
|
LMR344FJ-GE2IC CMOS 4 CIRCUIT 14SOPJ |
2,500 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | Rail-to-Rail | 1V/µs | 2 MHz | - | 1 pA | 250 µV | 400µA | 113 mA | 2.7 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOPJ |
|
|
BA10324AFJ-GE2IC OPAMP GP 4 CIRCUIT 14SOPJ |
909 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Not For New Designs | General Purpose | 4 | - | 0.2V/µs | 500 kHz | - | 20 nA | 2 mV | 500µA | 35 mA | 3 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOPJ |
|
|
BD14215FVJ-LAE2CURRENT SENSE AMPLIFIER: THE BD1 |
2,484 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Current Sense | 2 | Push-Pull | - | - | - | 1 µA | 600 µV | 310µA | - | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-TSSOP-BJ |
|
|
TLR377GYZ-E2ULTRA SMALL PACKAGE & HIGH PRECI |
3,925 |
|
Datasheet | - | 6-XFBGA, WLCSP | Tape & Reel (TR) | Active | Standard | 1 | Push-Pull, Rail-to-Rail | 2V/µs | 4 MHz | - | 0.5 pA | 100 µV | 585µA | 25 mA | 1.8 V | 5.5 V | -20°C ~ 85°C | - | - | Surface Mount | 6-WLCSP (0.88x0.58) |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
