Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
CLC412A/B2AIC OPAMP GP 2 CIRCUIT 20CLCC |
454 |
|
Datasheet | - | 20-CLCC | Bulk | Active | General Purpose | 2 | - | 1300V/µs | - | 250 MHz | 5 µA | 2 mV | 10.2mA | 70 mA | 10 V | 10 V | -55°C ~ 125°C | - | - | Surface Mount | 20-CLCC (8.89x8.89) |
|
|
HA4-5177/BIC 20CLCC |
1,590 |
|
Datasheet | - | 20-CLCC | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Surface Mount | 20-CLCC (8.89x8.89) |
|
HA2-5102-2IC OPAMP GP 2 CIRCUIT TO99-8 |
4,578 |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | General Purpose | 2 | - | 3V/µs | 47 kHz | - | 130 nA | 500 µV | 3mA | - | 40 V | 40 V | -55°C ~ 125°C | - | - | Through Hole | TO-99-8 |
|
CLC505AJ/BIC OPAMP GP 1 CIRCUIT |
645 |
|
Datasheet | - | - | Bulk | Active | General Purpose | 1 | - | 1700V/µs | - | 150 MHz | 10 µA | 2 mV | 9mA | 45 mA | 7 V | 7 V | -40°C ~ 85°C (TA) | - | - | - | - |
|
CLC110A/BPAIC BUFFER 1 CIRCUIT 8CDIP |
831 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | Buffer | 1 | - | 500V/µs | - | 400 kHz | 100 µA | 16 mV | - | 50 mA | 10 V | 10 V | -55°C ~ 125°C | - | - | Through Hole | 8-CDIP |
|
LM110J-8/883IC OPAMP GP 2 CIRCUIT 8MDIP |
1,596 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 2 | - | 30V/µs | - | 20 MHz | 1 nA | 1.5 mV | 3.9mA (x2 Channels) | - | 10 V | 36 V | -55°C ~ 125°C | - | - | Through Hole | 8-MDIP |
|
LM110J/883IC OPAMP GP 2 CIRCUIT 14CERDIP |
424 |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 2 | - | 30V/µs | - | 20 MHz | 1 nA | 1.5 mV | 3.9mA (x2 Channels) | - | 5 V | 18 V | -55°C ~ 125°C | - | - | Through Hole | 14-CERDIP |
|
|
CLC522A/B2AIC OPAMP GP 1 CIRCUIT 20CLCC |
266 |
|
Datasheet | - | 20-CLCC | Bulk | Active | General Purpose | 1 | - | 2000V/µs | 165 MHz | 165 MHz | 15 µA | 25 mV | 46mA | 80 mA | 14 V | 14 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | 20-CLCC (8.89x8.89) |
|
HA1-5114/883IC OPAMP GP 4 CIRCUIT 14CERDIP |
500 |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 4 | - | 20V/µs | 40 MHz | - | 200 nA | 2.5 mV | - | - | 10 V | 30 V | -55°C ~ 125°C | Military | MIL-STD-883 | Through Hole | 14-CERDIP |
|
CLC502A/BPAIC OPAMP GP 1 CIRCUIT 8CDIP |
1,937 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 500V/µs | - | 110 MHz | 30 µA | 1.6 mV | - | 45 mA | 10 V | 10 V | -55°C ~ 125°C (TA) | - | - | Through Hole | 8-CDIP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
