Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
CA5420AMZ96IC OPAMP GP 1 CIRCUIT 8SOIC |
4,963 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 0.5V/µs | 500 kHz | - | 0.05 pA | 2 mV | 450µA | 27 mA | 2 V | 20 V | -55°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
CA5420AMZIC OPAMP GP 1 CIRCUIT 8SOIC |
4,945 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | Rail-to-Rail | 0.5V/µs | 500 kHz | - | 0.05 pA | 2 mV | 450µA | 27 mA | 2 V | 20 V | -55°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
HA9P5320-5ZX96IC SAMPL/HOLD 1 CIRCUIT 16SOIC |
2,272 |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tape & Reel (TR) | Active | Sample and Hold | 1 | - | 45V/µs | 2 MHz | - | 100 nA | 500 µV | 11mA | 10 mA | 27 V | 40 V | 0°C ~ 75°C | - | - | Surface Mount | 16-SOIC |
|
CA3130EIC OPAMP GP 1 CIRCUIT 8DIP |
2,958 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | - | 30V/µs | 15 MHz | - | 5 pA | 8 mV | 10mA | 45 mA | 5 V | 16 V | -55°C ~ 125°C | - | - | Through Hole | 8-PDIP |
|
CA3140EIC OPAMP GP 1 CIRCUIT 8DIP |
2,862 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | - | 9V/µs | 4.5 MHz | - | 10 pA | 5 mV | 4mA | 40 mA | 4 V | 36 V | -55°C ~ 125°C | - | - | Through Hole | 8-PDIP |
|
|
CA3240EIC OPAMP GP 2 CIRCUIT 8DIP |
4,436 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | - | 9V/µs | 4.5 MHz | - | 10 pA | 5 mV | 8mA (x2 Channels) | 40 mA | 4 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
CA3260EIC CMOS 2 CIRCUIT 8DIP |
4,596 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | CMOS | 2 | - | 10V/µs | 4 MHz | - | 2 pA | 6 mV | 9mA (x2 Channels) | 45 mA | 4 V | 16 V | -55°C ~ 125°C | - | - | Through Hole | 8-PDIP |
|
|
ICL7650SCPA-1IC OPAMP ZERO-DRIFT 1 CIRC 8DIP |
4,563 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Zero-Drift | 1 | - | 2.5V/µs | 2 MHz | - | 4 pA | 700 µV | 2mA | 30 mA | 4.5 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
EL5108IW-T7IC OPAMP GP 1 CIRCUIT 6SOT |
3,199 |
|
Datasheet | - | SOT-23-6 | Tape & Reel (TR) | Obsolete | General Purpose | 1 | - | 4500V/µs | - | 450 MHz | 2 µA | 3 mV | 3.7mA | 135 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 6-SOT |
|
EL5131IW-T7IC OPAMP VFB 1 CIRCUIT SOT23-5 |
1,385 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Obsolete | Voltage Feedback | 1 | - | 350V/µs | 1.5 GHz | 300 MHz | 2.27 µA | 200 µV | 3.54mA | 100 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
