Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ISL28430FBZIC OPAMP GP 4 CIRCUIT 14SOIC |
1,974 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 4 | Rail-to-Rail | 0.2V/µs | 400 kHz | - | 250 pA | 5 µV | 20µA (x4 Channels) | 15 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SOIC |
|
ISL28433FVZIC OPAMP ZER-DRIFT 4CIRC 14TSSOP |
692 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tube | Active | Zero-Drift | 4 | Rail-to-Rail | 0.2V/µs | 400 kHz | - | 180 pA | 2 µV | 18µA (x4 Channels) | 19 mA | 1.8 V | 6 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
|
ISL28430FBZ-T7IC OPAMP GP 4 CIRCUIT 14SOIC |
1,926 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Rail-to-Rail | 0.2V/µs | 400 kHz | - | 250 pA | 5 µV | 20µA (x4 Channels) | 15 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SOIC |
|
|
ISL1571IRZIC OPAMP GP 2 CIRCUIT 16QFN |
480 |
|
Datasheet | - | 16-TFQFN Exposed Pad | Tube | Active | General Purpose | 2 | Differential | 1200V/µs | - | 250 MHz | 7 µA | 40 mV | 15mA (x2 Channels) | 1 A | 4.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 16-QFN (4x4) |
|
PS8352AL2-E3-AXHI-SPD OPTOCPLR 8-PIN SDIP |
1,851 |
|
Datasheet | - | 8-SOIC (0.268", 6.80mm Width) | Tape & Reel (TR) | Active | Isolation | 1 | Differential | - | - | 100 kHz | 650 nA | 250 µV | 13.5mA | 7.8 mA | 4.5 V | 5.5 V | -40°C ~ 110°C | - | - | Surface Mount | 8-SOIC |
|
|
PS8352AL2-V-E3-AXHI-SPD OPTOCPLR 8-PIN SDIP |
1,905 |
|
Datasheet | - | 8-SOIC (0.268", 6.80mm Width) | Tape & Reel (TR) | Active | Isolation | 1 | Differential | - | - | 100 kHz | 650 nA | 250 µV | 13.5mA | 7.8 mA | 4.5 V | 5.5 V | -40°C ~ 110°C | - | - | Surface Mount | 8-SOIC |
|
CA3130AMZ96IC OPAMP GP 1 CIRCUIT 8SOIC |
2,500 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | - | 30V/µs | 15 MHz | - | 5 pA | 2 mV | 10mA | 45 mA | 5 V | 16 V | -55°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
PS8551AL4-E3-AXIC OPAMP ISOLATION 1 CIRC 8DIPGW |
1,000 |
|
Datasheet | - | 8-SMD, Gull Wing | Tape & Reel (TR) | Active | Isolation | 1 | - | - | - | 100 kHz | 1 µA | 2 mV | 13.5mA | 7.8 mA | 4.5 V | 5.5 V | -40°C ~ 105°C | - | - | Surface Mount | 8-DIP Gull Wing |
|
|
PS8551AL4-V-E3-AXIC OPAMP ISOLATION 1 CIRC 8DIPGW |
1,000 |
|
Datasheet | - | 8-SMD, Gull Wing | Tape & Reel (TR) | Active | Isolation | 1 | - | - | - | 100 kHz | 1 µA | 2 mV | 13.5mA | 7.8 mA | 4.5 V | 5.5 V | -40°C ~ 105°C | - | - | Surface Mount | 8-DIP Gull Wing |
|
TBB1007GMTL-HVHF/VHF RF AMPLIFIER |
39,000 |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
