Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
HFA1112IPZIC BUFFER 1 CIRCUIT 8DIP |
2,331 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Buffer | 1 | - | 2400V/µs | - | 850 MHz | 25 µA | 8 mV | 21mA | 60 mA | 9 V | 11 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
CA5260MZIC OPAMP GP 2 CIRCUIT 8SOIC |
4,952 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 5V/µs | 3 MHz | - | 5 pA | 2 mV | 9mA (x2 Channels) | 45 mA | 4.5 V | 16 V | -55°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
HFA1110IBZIC BUFFER 1 CIRCUIT 8SOIC |
4,768 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Buffer | 1 | - | 1300V/µs | - | 750 MHz | 10 µA | 8 mV | 21mA | 60 mA | 9 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
ICL7650SCPDZIC OPAMP ZERO-DRIFT 1 CIRC 14DIP |
3,983 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | Zero-Drift | 1 | - | 2.5V/µs | 2 MHz | - | 4 pA | 700 µV | 2mA | 30 mA | 4.5 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
|
CA3260AEZIC CMOS 2 CIRCUIT 8DIP |
4,612 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Discontinued at Digi-Key | CMOS | 2 | - | 10V/µs | 4 MHz | - | 5 pA | 2 mV | 9mA (x2 Channels) | 22 mA | 4 V | 16 V | -55°C ~ 125°C | - | - | Through Hole | 8-PDIP |
|
EL8170FSZ-T7IC INST AMP 1 CIRCUIT 8SOIC |
2,110 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Instrumentation | 1 | Rail-to-Rail | 0.55V/µs | - | 192 kHz | 700 pA | 50 µV | 65µA | 32 mA | 2.4 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
EL8173FSZ-T7IC INST AMP 1 CIRCUIT 8SOIC |
3,715 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Instrumentation | 1 | Rail-to-Rail | 0.55V/µs | - | 396 kHz | 700 pA | 200 µV | 65µA | 32 mA | 2.4 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
EL5263IYZ-T7IC OPAMP CFA 2 CIRCUIT 8MSOP |
3,245 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Obsolete | Current Feedback | 2 | - | 4000V/µs | - | 500 MHz | 2 µA | 1.5 mV | 1.5mA (x2 Channels) | 100 mA | 5 V | 12 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-MSOP |
|
EL2480CSZ-T13IC OPAMP CFA 4 CIRCUIT 14SOIC |
4,080 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Current Feedback | 4 | - | 1200V/µs | - | 250 MHz | 16 µA | 2.5 mV | 3mA (x4 Channels) | 55 mA | 3 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
CA5260MZ96IC OPAMP GP 2 CIRCUIT 8SOIC |
1,664 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | Rail-to-Rail | 5V/µs | 3 MHz | - | 5 pA | 2 mV | 9mA (x2 Channels) | 45 mA | 4.5 V | 16 V | -55°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
