Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ISL28006FH100Z-T7AIC CURR SENSE 1 CIRCUIT SOT23-5 |
351 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | Current Sense | 1 | - | 0.76V/µs | - | 110 kHz | 4.7 µA | 1.2 mV | 50µA | 8.7 mA | 2.7 V | 28 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
ISL28006FHADJZ-T7AIC CURRENT SENSE 1 CIRCUIT 6SOT |
250 |
|
Datasheet | - | SOT-23-6 | Tape & Reel (TR) | Active | Current Sense | 1 | - | 0.67V/µs | - | 237 kHz | 4.7 µA | 1.2 mV | 50µA | 8.7 mA | 2.7 V | 28 V | -40°C ~ 125°C | - | - | Surface Mount | 6-SOT |
|
ISL28233FBZ-T7AIC OPAMP ZERO-DRIFT 2 CIRC 8SOIC |
250 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Zero-Drift | 2 | Rail-to-Rail | 0.2V/µs | 400 kHz | - | 180 pA | 2 µV | 18µA (x2 Channels) | 19 mA | 1.8 V | 6 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
ISL28208FBZ-T7AIC OPAMP GP 2 CIRCUIT 8SOIC |
497 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 0.45V/µs | 1.2 MHz | - | 13 nA | 25 µV | 185µA (x2 Channels) | 30 mA | 3 V | 40 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
ISL28208FUZ-T7AIC OPAMP GP 2 CIRCUIT 8MSOP |
250 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 0.45V/µs | 1.2 MHz | - | 13 nA | 25 µV | 185µA (x2 Channels) | 30 mA | 3 V | 40 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MSOP |
|
|
ISL55002IBZ-T7IC VOLTAGE FEEDBACK 2 CIRC 8SOIC |
210 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 2 | - | 300V/µs | 70 MHz | 200 MHz | 600 nA | 1.2 mV | 8.5mA (x2 Channels) | 140 mA | 4.5 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
ISL28433FBZ-T7AIC OPAMP ZERO-DRIFT 4CIRC 14SOIC |
250 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Zero-Drift | 4 | Rail-to-Rail | 0.2V/µs | 400 kHz | - | 180 pA | 2 µV | 18µA (x4 Channels) | 19 mA | 1.8 V | 6 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SOIC |
|
|
ISL28118MUZIC OPAMP GP 1 CIRCUIT 8MSOP |
316 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Active | General Purpose | 1 | Rail-to-Rail | 1.2V/µs | 4 MHz | - | 230 nA | 25 µV | 850µA | 28 mA | 3 V | 40 V | -55°C ~ 125°C | - | - | Surface Mount | 8-MSOP |
|
PS8352AL2-V-AX8PIN DIP W |
530 |
|
Datasheet | - | 8-SOIC (0.268", 6.80mm Width) | Cut Tape (CT) | Active | Isolation | 1 | Differential | - | - | 100 kHz | 650 nA | 250 µV | 13.5mA | 7.8 mA | 4.5 V | 5.5 V | -40°C ~ 110°C | - | - | Surface Mount | 8-SOIC |
|
PS8551AL4-AXIC OPAMP ISOLATION 1 CIRC 8DIPGW |
4,106 |
|
Datasheet | - | 8-SMD, Gull Wing | Tube | Active | Isolation | 1 | - | - | - | 100 kHz | 1 µA | 2 mV | 13.5mA | 7.8 mA | 4.5 V | 5.5 V | -40°C ~ 105°C | - | - | Surface Mount | 8-DIP Gull Wing |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
