Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LM2904ADMR2IC OPAMP DUAL SGL SUPPLY 8MICRO |
4,036 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | - | - | 1 MHz | - | 45 nA | 2 mV | 800µA (x2 Channels) | 40 mA | 3 V | 26 V | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
|
NCS7101SN2T1IC OPAMP GP 1 CIRCUIT 5TSOP |
4,234 |
|
Datasheet | - | SOT-23-5 Thin, TSOT-23-5 | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 1.2V/µs | 1 MHz | - | 1 pA | 600 µV | 1.13mA | 72 mA | 1.8 V | 10 V | -40°C ~ 85°C | - | - | Surface Mount | 5-TSOP |
|
|
NCV2904DMR2IC OPAMP DUAL SGL SUPP LP 8MICRO |
4,062 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | - | 0.6V/µs | 1 MHz | - | 45 nA | 7 mV | 1.5mA (x2 Channels) | 40 mA | 3 V | 32 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MSOP |
|
NCS2002SN2T1IC OPAMP GP 1 CIRCUIT 6TSOP |
2,609 |
|
Datasheet | - | SOT-23-6 Thin, TSOT-23-6 | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 1.3V/µs | 900 kHz | - | 10 pA | 500 µV | 820µA | 128 mA | 0.9 V | 7 V | -40°C ~ 105°C | - | - | Surface Mount | 6-TSOP |
|
LM2904VNIC OPAMP DUAL LOW POWER 8DIP |
3,860 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | - | - | 1 MHz | - | 45 nA | 7 mV | 1.5mA (x2 Channels) | 40 mA | 3 V | 32 V | -40°C ~ 125°C | - | - | Through Hole | 8-PDIP |
|
|
LM2904VDR2IC OPAMP DUAL LOW POWER 8SOIC |
2,474 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | - | - | 1 MHz | - | 45 nA | 7 mV | 1.5mA (x2 Channels) | 40 mA | 3 V | 32 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
LM2902VNIC OPAMP GP 4 CIRCUIT 14DIP |
3,791 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 4 | - | - | 1 MHz | - | 90 nA | 2 mV | - | 40 mA | 3 V | 32 V | -40°C ~ 125°C | - | - | Through Hole | 14-PDIP |
|
|
LM201ADR2IC OPAMP SGL NON COMPENSTD 8SOIC |
2,531 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 1 | - | 0.5V/µs | - | - | 30 nA | 700 µV | 1.8mA | - | 10 V | 44 V | -25°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
MC33503SNT1IC OPAMP SINGLE R-R 1V 5TSOP |
4,282 |
|
Datasheet | SMARTMOS™ | SOT-23-5 Thin, TSOT-23-5 | Cut Tape (CT) | Obsolete | General Purpose | 1 | Rail-to-Rail | 3V/µs | 4 MHz | - | 0.04 pA | 500 µV | 1.65mA | 70 mA | 1 V | 7 V | -40°C ~ 105°C | - | - | Surface Mount | 5-TSOP |
|
|
NCV2902DR2IC OPAMP QUAD SGL SUPPLY 14SOIC |
4,817 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 4 | - | - | 1 MHz | - | 90 nA | 2 mV | - | 40 mA | 3 V | 32 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
