Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
FAN4274IMU8XIC CMOS 2 CIRCUIT 8MSOP |
2,132 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 3V/µs | 3.7 MHz | 3.7 MHz | 5 pA | 6 mV | 200µA (x2 Channels) | 33 mA | 2.3 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
|
MC33079DR2IC OPAMP QUAD LOW NOISE 14SOIC |
3,561 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 4 | - | 7V/µs | 16 MHz | - | 300 nA | 150 µV | 8.4mA | 37 mA | 10 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
|
MC34074DR2IC OPAMP QUAD SGL SUPP HS 14SOIC |
3,812 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 4 | Single-Ended | 13V/µs | 4.5 MHz | - | 100 nA | 1 mV | 1.9mA (x4 Channels) | 30 mA | 3 V | 44 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 14-SOIC |
|
|
MC33074DR2IC OPAMP QUAD 4.5MHZ 14SOIC |
4,848 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 4 | Single-Ended | 13V/µs | 4.5 MHz | - | 100 nA | 1 mV | 1.9mA (x4 Channels) | 30 mA | 3 V | 44 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 14-SOIC |
|
NCS333SN2T1GIC OPAMP ZERO-DRIFT 1 CIRC 5TSOP |
1,277 |
|
Datasheet | - | SOT-23-5 Thin, TSOT-23-5 | Tape & Reel (TR) | Obsolete | Zero-Drift | 1 | Rail-to-Rail | 0.1V/µs | 350 kHz | - | 60 pA | 10 µV | 17µA | 25 mA | 1.8 V | 5.5 V | -40°C ~ 105°C | - | - | Surface Mount | 5-TSOP |
|
|
MC33174DR2IC OPAMP QUAD LOW POWER 14SOIC |
3,539 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 4 | - | 2.1V/µs | 1.8 MHz | - | 20 nA | 2 mV | 180µA (x4 Channels) | 27 mA | 3 V | 44 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
|
MC33074ADR2IC OPAMP QUAD 4.5MHZ 14SOIC |
2,483 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 4 | Single-Ended | 13V/µs | 4.5 MHz | - | 100 nA | 500 µV | 1.9mA (x4 Channels) | 30 mA | 3 V | 44 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 14-SOIC |
|
|
MC33179DR2IC OPAMP QUAD LP LO NOISE 14SOIC |
4,800 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 4 | - | 2V/µs | 5 MHz | - | 100 nA | 150 µV | 1.7mA (x4 Channels) | 100 mA | 4 V | 36 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 14-SOIC |
|
|
MC33204DR2IC OPAMP QUAD R-R LO VOLT 14SOIC |
4,355 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 4 | Rail-to-Rail | 1V/µs | 2.2 MHz | - | 80 nA | 10 mV | 900µA (x4 Channels) | 80 mA | 1.8 V | 12 V | -40°C ~ 105°C (TA) | - | - | Surface Mount | 14-SOIC |
|
FHP3232IM8XIC VOLTAGE FEEDBACK 2 CIRC 8SOIC |
3,075 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Voltage Feedback | 2 | Rail-to-Rail | 400V/µs | 260 MHz | 85 MHz | 1.8 µA | 1 mV | 2.5mA (x2 Channels) | 100 mA | 2.7 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
