Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
SC2904VDR2IC OPAMP 8SOIC |
50,000 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 2 | - | - | - | - | 45 nA | 2 mV | - | 40 mA | 3 V | 26 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
SC2904VDR2GIC OPAMP GP 2 CIRCUIT 8SOIC |
2,120 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | - | - | - | - | 45 nA | 2 mV | - | 40 mA | 3 V | 26 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
MC34071ADR2GIC OPAMP GP 1 CIRCUIT 8SOIC |
1,956 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Single-Ended | 13V/µs | 4.5 MHz | - | 100 nA | 500 µV | 1.9mA | 30 mA | 3 V | 44 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
NCS2002SN1T1IC OPAMP GP 1 CIRCUIT 6TSOP |
2,418 |
|
Datasheet | - | SOT-23-6 Thin, TSOT-23-6 | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 1.3V/µs | 900 kHz | - | 10 pA | 500 µV | 820µA | 128 mA | 0.9 V | 7 V | -40°C ~ 105°C | - | - | Surface Mount | 6-TSOP |
|
|
MC34071ADIC OPAMP GP 1 CIRCUIT 8SOIC |
1,223 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 1 | Single-Ended | 13V/µs | 4.5 MHz | - | 100 nA | 500 µV | 1.9mA | 30 mA | 3 V | 44 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
|
NCV2904VDR2GIC OPAMP GP 2 CIRCUIT 8SOIC |
1,862 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | - | 0.6V/µs | 1 MHz | - | 45 nA | 7 mV | 1.5mA (x2 Channels) | 40 mA | 3 V | 32 V | -40°C ~ 150°C | - | - | Surface Mount | 8-SOIC |
|
TL062VDIC OPAMP JFET 2 CIRCUIT 8SOIC |
7,080 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | J-FET | 2 | - | 6V/µs | 2 MHz | - | 30 pA | 3 mV | 200µA (x4 Channels) | - | 36 V | 36 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
|
TL064CNIC OPAMP JFET 4 CIRCUIT 14DIP |
137,289 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | J-FET | 4 | - | 3.5V/µs | 1 MHz | - | 30 pA | 3 mV | 200µA (x4 Channels) | 20 mA | 10 V | 30 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
SC2902VDTBR2GIC OPAMP GP 14TSSOP |
4,640 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Surface Mount | 14-TSSOP |
|
LMV301SN3T1GIC CMOS 1 CIRCUIT 5TSOP |
4,615 |
|
Datasheet | - | SOT-23-5 Thin, TSOT-23-5 | Tape & Reel (TR) | Obsolete | CMOS | 1 | Rail-to-Rail | 1V/µs | 1 MHz | - | 3 pA | 1.7 mV | 200µA | 160 mA | 1.8 V | 5 V | - | - | - | Surface Mount | 5-TSOP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
