Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
NJU77552KU1-TE3IC OPAMP GP 2 CIRCUIT 8DFN |
14,573 |
|
Datasheet | - | 8-XFDFN Exposed Pad | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 0.8V/µs | 1.7 MHz | - | 1 pA | 1 mV | 50µA | 60 mA | 1.8 V | 5.5 V | -55°C ~ 125°C | - | - | Surface Mount | DFN8-U1 |
|
NJM842G-TE2IC OPAMP GP 2 CIRCUIT 8SOP |
2,413 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | - | 8.5V/µs | 3.5 MHz | - | 120 nA | 800 µV | 4.3mA | 45 mA | 3 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOP |
|
|
NJM2902BVB4T1-TE1HIGH EMC PERFORMANCE, SINGLE SUP |
1,976 |
|
Datasheet | - | 14-LSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Push-Pull | 0.4V/µs | 900 kHz | - | 10 nA | 500 µV | 1.2mA | 40 mA | 3 V | 36 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 14-SSOP |
|
NJM3474G-TE2IC OPAMP GP 4 CIRCUIT 14SOP |
2,710 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | - | 10V/µs | 3 MHz | - | 80 nA | 1 mV | 8mA | 60 mA | 3 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SOP |
|
NJM2725G-TE2160MHZ, 1.4NV/HZ, OPERATIONAL AM |
2,488 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 2 | Push-Pull | 15V/µs | 160 MHz | - | 4.6 µA | 500 µV | 4mA (x2 Channels) | 30 mA | 4 V | 10 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOP |
|
NJM2725R-TE1160MHZ, 1.4NV/HZ, OPERATIONAL AM |
1,933 |
|
Datasheet | - | 8-LSSOP, 8-MSOP (0.110", 2.80mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 2 | Push-Pull | 15V/µs | 160 MHz | - | 4.6 µA | 500 µV | 4mA (x2 Channels) | 30 mA | 4 V | 10 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-VSP |
|
NJM8830KW1-TE3ULTRALOW DISTORTION, ULTRALOW NO |
1,500 |
|
Datasheet | - | 8-WFDFN Exposed Pad | Tape & Reel (TR) | Active | Audio | 2 | Rail-to-Rail | 30V/µs | 90 MHz | - | 150 nA | 500 µV | 6.5mA (x2 Channels) | 100 mA | 4 V | - | -40°C ~ 125°C | - | - | Surface Mount | DFN8-W1 (ESON8-W1) |
|
NJM8512BE-TE1IC OPAMP JFET 2 CIRCUIT 8SOP |
1,629 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 2 | - | 20V/µs | 7 MHz | - | 25 pA | 80 µV | 2.6mA | - | 9 V | 32 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOP |
|
|
NL8802ANAE1SHIGH QUALITY SOUND DUAL OPERATIO |
2,030 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Standard | 2 | Single-Ended | 11V/µs | 45 MHz | - | 500 µA | 1 mV | 4mA (x2 Channels) | 60 mA | 6 V | 44 V | -40°C ~ 105°C (TA) | - | - | Surface Mount | 8-EMP |
|
|
NJM8532RZ-TE214V, LOW NOISE, LOW POWER, RAIL- |
2,024 |
|
Datasheet | - | 8-LSSOP, 8-MSOP (0.110", 2.80mm Width) | Tape & Reel (TR) | Active | Standard | 2 | Single Ended, Rail-to-Rail | 0.4V/µs | 1 MHz | - | 1 nA | 1 mV | 580µA | - | 1.8 V | 14 V | -40°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 8-MSOP (VSP8) |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
