Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
NJM2137M#IC OPAMP GP 2 CIRCUIT 8DMP |
1,912 |
|
Datasheet | - | 8-SOIC (0.197", 5.00mm Width) | Tube | Active | General Purpose | 2 | - | 45V/µs | 200 MHz | - | 500 nA | 1 mV | 1.14mA | - | 2.7 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-DMP |
|
NJU7048G-TE2IC CMOS 4 CIRCUIT 14SOP |
1,069 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | Rail-to-Rail | 9V/µs | 5 MHz | - | 1 pA | 900 µV | 5.3mA | 110 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SOP |
|
|
NJU77004V-TE1IC CMOS 4 CIRCUIT 14SSOP |
3,368 |
|
Datasheet | - | 14-LSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | Rail-to-Rail | 0.007V/µs | 1 kHz | - | 1 pA | 350 µV | 920nA | - | 1.5 V | 5.5 V | -40°C ~ 105°C | - | - | Surface Mount | 14-SSOP |
|
NJU7002DIC CMOS 2 CIRCUIT 8DIP |
2,577 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | CMOS | 2 | - | 0.05V/µs | 100 kHz | - | 1 pA | 10 mV | - | - | 1 V | 16 V | -20°C ~ 75°C | - | - | Through Hole | 8-DIP |
|
|
NJU77806F3-TE1IC CMOS 1 CIRCUIT SC88A |
1,928 |
|
Datasheet | - | 5-TSSOP, SC-70-5, SOT-353 | Tape & Reel (TR) | Active | CMOS | 1 | Rail-to-Rail | 1.1V/µs | 4.4 MHz | - | 1 pA | 700 µV | 500µA | - | 1.8 V | 5.5 V | -40°C ~ 105°C | - | - | Surface Mount | SC-88A |
__5.jpg "NJU77701F-TE2")
|
NJU77701F-TE2IC CMOS 1 CIRCUIT SOT23-5 |
4,526 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | CMOS | 1 | Rail-to-Rail | 35V/µs | 34 MHz | - | 1 pA | 400 µV | 3.8mA | 110 mA | 2.4 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 (MTP5) |
|
NJM8202R-TE2IC OPAMP GP 2 CIRCUIT 8VSP |
4,249 |
|
Datasheet | - | 8-LSSOP, 8-MSOP (0.110", 2.80mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Differential, Rail-to-Rail | 3.5V/µs | 10 MHz | - | 100 nA | 1 mV | 4mA | - | 2.5 V | 14 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSP |
|
NJU7043E-TE2IC CMOS 2 CIRCUIT 8SOP |
2,342 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 0.7V/µs | 800 kHz | - | 1 pA | 10 mV | 600µA | 40 mA | 1.8 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOP |
|
|
NJU7043DIC CMOS 2 CIRCUIT 8DIP |
3,565 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | CMOS | 2 | Rail-to-Rail | 0.7V/µs | 800 kHz | - | 1 pA | 10 mV | 600µA | 40 mA | 1.8 V | 5.5 V | -40°C ~ 85°C | - | - | Through Hole | 8-DIP |
|
|
NJU7015D#IC CMOS 2 CIRCUIT 8DIP |
1,341 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | CMOS | 2 | Rail-to-Rail | 1V/µs | 1 MHz | - | 1 pA | 10 mV | 80µA | - | 1 V | 5.5 V | -40°C ~ 85°C | - | - | Through Hole | 8-DIP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
