Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
HV56022-V/KNXDUAL-CHANNEL HIGH-VOLTAGE AMPLIF |
3,304 |
|
Datasheet | - | 20-VFQFN Exposed Pad | Tube | Active | General Purpose | 2 | - | 0.09V/µs | - | 124 Hz | - | 110 mV | 16.5mA (x2 Channels) | 40 mA | 50 V | 225 V | 0°C ~ 125°C (TJ) | - | - | Surface Mount | 20-QFN (4x4) |
|
|
LE87100NQCTIC TELECOM INTERFACE 100MHZ |
4,968 |
|
Datasheet | - | 16-VQFN Exposed Pad | Tape & Reel (TR) | Active | Current Feedback | 2 | Single-Ended | 1200V/µs | 100 MHz | 180 MHz | - | - | 16mA (x2 Channels) | 400 mA | 8 V | 12 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 16-QFN (4x4) |
|
MCP660-E/STIC OPAMP GP 3 CIRCUIT 14TSSOP |
266 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tube | Active | General Purpose | 3 | Rail-to-Rail | 32V/µs | 60 MHz | - | 6 pA | 1.8 mV | 6mA (x3 Channels) | 90 mA | 2.5 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 14-TSSOP |
|
MCP651-E/SNIC OPAMP GP 1 CIRCUIT 8SOIC |
680 |
|
Datasheet | mCal Technology | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | Rail-to-Rail | 30V/µs | 50 MHz | - | 6 pA | 200 µV | 6mA | 100 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
MCP6V01T-E/MNYIC OPAMP ZERO-DRIFT 1 CIRC 8TDFN |
6,338 |
|
Datasheet | - | 8-WFDFN Exposed Pad | Tape & Reel (TR) | Active | Zero-Drift | 1 | Rail-to-Rail | 0.5V/µs | 1.3 MHz | - | 1 pA | 2 µV | 300µA | - | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-TDFN (2x3) |
|
|
MCP6V08-E/SNIC OPAMP ZERO-DRIFT 1 CIRC 8SOIC |
300 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Zero-Drift | 1 | Rail-to-Rail | 0.5V/µs | 1.3 MHz | - | 6 pA | 3 µV | 300µA | - | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
MCP6V79-E/STIC OPAMP ZER-DRIFT 4CIRC 14TSSOP |
184 |
|
Datasheet | Zero-Drift | 14-TSSOP (0.173", 4.40mm Width) | Tube | Active | Zero-Drift | 4 | Rail-to-Rail | 1V/µs | 2 MHz | - | 1 pA | 25 µV | 170µA (x4 Channels) | 26 mA | 2 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 14-TSSOP |
|
HV56020T-V/KXXIC OPAMP GP 2 CIRCUIT 43VQFN |
2,376 |
|
Datasheet | - | 43-VFQFN Exposed Pad | Tape & Reel (TR) | Active | General Purpose | 2 | - | 0.09V/µs | - | 124 Hz | - | 110 mV | - | - | 6 V | 7 V | 0°C ~ 125°C (TJ) | - | - | Surface Mount | 43-VQFN (7x7) |
|
|
HV56020-V/KXXDUAL-CHANNEL HIGH-VOLTAGE AMPLIF |
1,811 |
|
Datasheet | - | 43-VFQFN Exposed Pad | Tray | Active | General Purpose | 2 | - | 0.09V/µs | - | 124 Hz | - | 110 mV | 16.5mA (x2 Channels) | 40 mA | 50 V | 225 V | 0°C ~ 125°C (TJ) | - | - | Surface Mount | 43-VQFN (7x7) |
|
|
MCP6496T-E/LTSINGLE, 30MHZ OP AMP, E TEMP |
2,358 |
|
Datasheet | - | 5-TSSOP, SC-70-5, SOT-353 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 40V/µs | 30 MHz | - | 1 pA | 1.6 mV | 2mA | 55 mA | 1.8 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | SC-70-5 |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
