Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MAX4175AKEUKIC OPAMP GP 1 CIRCUIT SOT23-5 |
289 |
|
Datasheet | - | SC-74A, SOT-753 | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 0.7V/µs | 2 MHz | 970 kHz | 50 pA | 500 µV | 355µA | 65 mA | 2.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
MAX4236AEUAIC OPAMP GP 1 CIRCUIT 8UMAX |
3,028 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.3V/µs | 1.7 MHz | - | 1 pA | 5 µV | 350µA | 30 mA | 2.4 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-uMAX/uSOP |
|
|
MAX4237AEUAIC OPAMP GP 1 CIRCUIT 8UMAX |
5,567 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Obsolete | General Purpose | 1 | Rail-to-Rail | 1.3V/µs | 7.5 MHz | - | 1 pA | 5 µV | 350µA | 30 mA | 2.4 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-uMAX/uSOP |
|
MAX4071ATA-TIC CURRENT SENSE 1 CIRCUIT 8TDFN |
4,006 |
|
Datasheet | - | 8-WDFN Exposed Pad | Tape & Reel (TR) | Obsolete | Current Sense | 1 | - | - | - | 100 kHz | 2.4 µA | 80 µV | 100µA | - | 2.7 V | 24 V | -40°C ~ 125°C | - | - | Surface Mount | 8-TDFN (3x3) |
|
MAX4376FAUK-TIC CURR SENSE 1 CIRCUIT SOT23-5 |
1,775 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Obsolete | Current Sense | 1 | - | 10V/µs | - | 500 kHz | - | - | 1mA | - | 3 V | 28 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
MAX4080TASAIC CURRENT SENSE 1 CIRCUIT 8SOIC |
4,242 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Current Sense | 1 | - | - | - | 250 kHz | 5 µA | 100 µV | 75µA | - | 4.5 V | 76 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
MAX4495AUDIC OPAMP GP 4 CIRCUIT 14TSSOP |
1,323 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tube | Obsolete | General Purpose | 4 | Rail-to-Rail | 3V/µs | 5 MHz | - | 200 nA | 300 µV | 770µA (x4 Channels) | 15 mA | 4.5 V | 11 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
|
MAX4274BKEUAIC OPAMP GAIN 50 R-TO-R 8-UMAX |
861 |
|
Datasheet | GainAmp™ | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tube | Discontinued at Digi-Key | General Purpose | 2 | Rail-to-Rail | 0.7V/µs | 2 MHz | 330 kHz | 50 pA | 500 µV | 330µA (x2 Channels) | 65 mA | 2.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-uMAX-EP|8-uSOP-EP |
|
|
MAX4274BKESAIC OPAMP GAIN 50 R-TO-R 8-SOIC |
526 |
|
Datasheet | GainAmp™ | 8-SOIC (0.154", 3.90mm Width) | Tube | Discontinued at Digi-Key | General Purpose | 2 | Rail-to-Rail | 0.7V/µs | 2 MHz | 330 kHz | 50 pA | 500 µV | 330µA (x2 Channels) | 65 mA | 2.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
MAX4486AKAIC OPAMP GP 2 CIRCUIT SOT23-8 |
1,314 |
|
Datasheet | - | SOT-23-8 | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 20V/µs | 7 MHz | - | 0.1 pA | 300 µV | 2.2mA (x2 Channels) | 33 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-8 |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
