Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MXL1001ACN8IC OPAMP GP 1 CIRCUIT 8DIP |
774 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Not For New Designs | General Purpose | 1 | - | 0.25V/µs | 800 kHz | - | - | 10 µV | - | - | 6 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
ICL7622ACPDIC CMOS 2 CIRCUIT 14DIP |
762 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Bulk | Active | CMOS | 2 | Rail-to-Rail | 1.6V/µs | 1.4 MHz | - | 1 pA | 2 mV | 1mA (x2 Channels) | - | 2 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
MAX422MTVIC OPAMP CFA 1 CIRCUIT TO99-8 |
741 |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Obsolete | CMOS, Chopper (Zero-Drift) | 1 | - | 0.5V/µs | 500 kHz | - | 10 pA | 1 µV | 1.3mA | 80 mA | 5 V | 33 V | -40°C ~ 85°C | - | - | Through Hole | TO-99-8 |
|
|
MAX422CTVIC OPAMP CFA 1 CIRCUIT TO99-8 |
632 |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | CMOS, Chopper (Zero-Drift) | 1 | - | 0.5V/µs | 500 kHz | - | 10 pA | 1 µV | 1.3mA | 80 mA | 5 V | 33 V | -40°C ~ 85°C | - | - | Through Hole | TO-99-8 |
|
ICL7632ECSEIC CMOS 3 CIRCUIT 16SOIC |
625 |
|
Datasheet | - | 16-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | CMOS | 3 | Rail-to-Rail | 1.6V/µs | 1.4 MHz | - | 1 pA | 20 mV | 1mA (x3 Channels) | - | 2 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
|
|
MAX448ACPDIC OPAMP GP 4 CIRCUIT 14DIP |
606 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 4 | - | 90V/µs | 100 MHz | - | 650 nA | 3 mV | 30mA (x4 Channels) | - | 6 V | 6 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
MAX4174BAEUKIC OPAMP GP 1 CIRCUIT SOT23-5 |
571 |
|
Datasheet | - | SC-74A, SOT-753 | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 0.7V/µs | 2 MHz | 560 kHz | 50 pA | 500 µV | 330µA | 65 mA | 2.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
|
MAX448ACPD-2IC OPAMP GP 4 CIRCUIT 14DIP |
518 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 4 | - | 90V/µs | 100 MHz | - | 650 nA | 3 mV | 30mA (x4 Channels) | - | 6 V | 6 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
MAX4275CAESAIC OPAMP GAIN 100 R-TO-R 8-SOIC |
515 |
|
Datasheet | GainAmp™ | 8-SOIC (0.154", 3.90mm Width) | Tube | Discontinued at Digi-Key | General Purpose | 2 | Rail-to-Rail | 0.7V/µs | 2 MHz | 230 kHz | 50 pA | 500 µV | 355µA (x2 Channels) | 65 mA | 2.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
ICL7632CCJEIC CMOS 3 CIRCUIT 16CERDIP |
427 |
|
Datasheet | - | 16-CDIP (0.300", 7.62mm) | Bulk | Active | CMOS | 3 | Rail-to-Rail | 1.6V/µs | 1.4 MHz | - | 1 pA | 10 mV | 1mA (x3 Channels) | - | 2 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 16-CERDIP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
