Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MAX4451EKA+G069IC OPAMP VFB 2 CIRCUIT SOT23-8 |
3,594 |
|
Datasheet | - | SOT-23-8 | Bulk | Obsolete | Voltage Feedback | 2 | Rail-to-Rail | 485V/µs | 175 MHz | 210 MHz | 6.5 µA | 4 mV | 6.5mA (x2 Channels) | 70 mA | 4.5 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-8 |
|
MAX44264EWT+TCLAIC OPAMP GP 1 CIRCUIT 6WLP |
3,700 |
|
Datasheet | nanoPower | 6-WFBGA, WLBGA | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.002V/µs | 9 kHz | - | 200 pA | 500 µV | 750nA | 36 mA | 1.8 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 6-WLP (1.238x0.837) |
|
MAX9928FABT+G45IC CURRENT SENSE 1 CIRCUIT 5UCSP |
2,718 |
|
Datasheet | - | 5-WFBGA, CSPBGA | Bulk | Obsolete | Current Sense | 1 | - | - | - | 150 kHz | 1.6 µA | 600 µV | 20µA | - | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 5-UCSP (1x1.52) |
|
MAX4412EXK+TG21IC OPAMP VFB 1 CIRCUIT SC70-5 |
1,488 |
|
Datasheet | - | 5-TSSOP, SC-70-5, SOT-353 | Tape & Reel (TR) | Obsolete | Voltage Feedback | 1 | Rail-to-Rail | 220V/µs | - | 500 MHz | 1.6 µA | 400 µV | 1.7mA | 75 mA | 2.7 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | SC-70-5 |
|
MAX9938WEBS+TG45IC CURRENT SENSE 1 CIRCUIT 4UCSP |
1,978 |
|
Datasheet | - | 4-WFBGA, CSPBGA | Tape & Reel (TR) | Active | Current Sense | 1 | - | - | - | 60 kHz | - | 500 µV | 1.1µA | - | 1.6 V | 28 V | -40°C ~ 85°C | - | - | Surface Mount | 4-UCSP (1.05x1.05) |
|
MAX44284FAUT+TG103IC CURRENT SENSE 1 CIRCUIT SOT6 |
2,024 |
|
Datasheet | - | SOT-23-6 | Tape & Reel (TR) | Active | Current Sense | 1 | - | - | - | 3 kHz | 80 nA | 10 µV | 21µA | - | 1.7 V | 5.5 V | -40°C ~ 125°C | Automotive | - | Surface Mount | SOT-6 |
|
MAX4390EXT-TIC CURR SENSE 1 CIRCUIT SC70-6 |
3,188 |
|
Datasheet | - | 6-TSSOP, SC-88, SOT-363 | Tape & Reel (TR) | Obsolete | Current Sense | 1 | Rail-to-Rail | 500V/µs | - | 72 MHz | 15 µA | 18 mV | 3.2mA | 55 mA | 4.5 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | SC-70-6 |
|
MAX479ESD+IC OPAMP GP 4 CIRCUIT 14SOIC |
1,283 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 4 | - | 0.04V/µs | 85 kHz | - | 3 nA | 50 µV | 13µA (x4 Channels) | - | 3 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
|
806-0539-22+DIC OP AMP ASIC CSBGA |
4,101 |
|
Datasheet | - | - | Bulk | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
MAX40108ANT+IC OPAMP GP 1 CIRCUIT 6WLP |
3,189 |
|
Datasheet | - | 6-XFBGA, WLPBGA | Strip | Active | General Purpose | 1 | Rail-to-Rail | 0.08V/µs | 168 kHz | - | 55 pA | 1 µV | 25.5µA | 25 mA | 0.9 V | 3.6 V | -40°C ~ 125°C | - | - | Surface Mount | 6-WLP (1.08x0.73) |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
