Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MAX4070ATA+IC CURR SENSE 1 CIRCUIT 8TDFN |
2,001 |
|
Datasheet | - | 8-WDFN Exposed Pad | Obsolete | Current Sense | 1 | - | - | - | 100 kHz | 2.4 µA | 80 µV | 100µA | - | 2.7 V | 24 V | -40°C ~ 125°C | - | - | Surface Mount | 8-TDFN (3x3) | |
|
MAX471CPA+IC CURRENT SENSE 1 CIRCUIT 8DIP |
1,963 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Obsolete | Current Sense | 1 | - | - | - | - | - | - | 50µA | - | 3 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
MAX40006ANT+IC CMOS 1 CIRCUIT 6WLP |
1,656 |
|
Datasheet | - | 6-XFBGA, WLPBGA | Strip | Active | CMOS | 1 | Rail-to-Rail | 0.14V/µs | - | 300 kHz | 1 pA | 200 µV | 4.5µA | 15 mA | 1.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 6-WLP (1.08x0.73) |
|
|
MAX40007ANT+IC CMOS 1 CIRCUIT 6WLP |
1,904 |
|
Datasheet | nanoPower | 6-XFBGA, WLPBGA | Strip | Active | CMOS | 1 | Rail-to-Rail | 0.012V/µs | 15 kHz | - | 40 pA | 300 µV | 700nA | 10 mA | 1.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 6-WLP (1.08x0.73) |
|
MAX406BC/DIC OPAMP GP 1 CIRCUIT DIE |
2,135 |
|
Datasheet | - | Die | Bulk | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.005V/µs | 40 kHz | 100 kHz | 0.1 pA | 750 µV | 1µA | 600 µA | 2.5 V | 10 V | 0°C ~ 70°C | - | - | Surface Mount | Die |
|
|
MAX44260/DIC OPAMP GP 1 CIRCUIT DIE |
4,801 |
|
Datasheet | - | Die | Bulk | Obsolete | General Purpose | 1 | Rail-to-Rail | 7V/µs | 15 MHz | - | 0.01 pA | 10 µV | 750µA | 50 mA | 1.8 V | 5.5 V | - | - | - | Surface Mount | Die |
|
MAX9622AXK+IC OPAMP GP 1 CIRCUIT SC70-5 |
4,601 |
|
Datasheet | - | 5-TSSOP, SC-70-5, SOT-353 | Tube | Obsolete | General Purpose | 1 | Rail-to-Rail | 20V/µs | 50 MHz | - | 62 nA | 100 µV | 1mA | - | 2 V | 5.25 V | -40°C ~ 125°C | - | - | Surface Mount | SC-70-5 |
|
|
MAX9632ATA+IC OPAMP GP 1 CIRCUIT 8TDFN |
3,602 |
|
Datasheet | - | 8-WDFN Exposed Pad | Tube | Obsolete | General Purpose | 1 | Rail-to-Rail | 30V/µs | 55 MHz | - | 30 nA | 30 µV | 3.9mA | 560 µA | 4.5 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-TDFN (3x3) |
|
|
MAX9633ATA+IC OPAMP GP 2 CIRCUIT 8TDFN |
3,206 |
|
Datasheet | - | 8-WDFN Exposed Pad | Tube | Obsolete | General Purpose | 2 | - | 18V/µs | 27 MHz | - | 4.5 µA | 70 µV | 3.5mA (x2 Channels) | 50 mA | 4.5 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-TDFN (3x3) |
|
MAX40010FAUT+IC CURRENT SENSE 1 CIRCUIT SOT6 |
4,252 |
|
Datasheet | - | SOT-23-6 | Strip | Active | Current Sense | 1 | - | - | - | 80 kHz | 65 µA | 12 µV | 350µA | - | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-6 |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
