Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MAX44205AUB+TIC OPAMP DIFF 1 CIRCUIT 10UMAX |
4,496 |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) Exposed Pad | Tape & Reel (TR) | Obsolete | Differential | 1 | - | 180V/µs | 400 MHz | 180 MHz | 30 nA | 200 µV | 3.7mA | 60 mA | 2.7 V | 13.2 V | -40°C ~ 125°C | - | - | Surface Mount | 10-uMAX-EP |
|
MAX410EPAIC OPAMP GP 1 CIRCUIT 8DIP |
4,966 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | - | 4.5V/µs | 28 MHz | - | 80 nA | 120 µV | 2.5mA | 35 mA | 4.8 V | 10.5 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
MAX4433EUA+IC OPAMP GP 2 CIRCUIT 8UMAX |
1,201 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Obsolete | General Purpose | 2 | - | 145V/µs | - | 215 MHz | 11 µA | 1.25 mV | 11mA (x2 Channels) | 60 mA | 9 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 8-uMAX/uSOP |
|
MAX4294ESD+TIC OPAMP GP 4 CIRCUIT 14SOIC |
1,802 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Rail-to-Rail | 0.2V/µs | 500 kHz | - | 15 nA | 200 µV | 100µA (x4 Channels) | 20 mA | 1.8 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
MAX4294EUD+TIC OPAMP GP 4 CIRCUIT 14TSSOP |
2,829 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Rail-to-Rail | 0.2V/µs | 500 kHz | - | 15 nA | 200 µV | 100µA (x4 Channels) | 20 mA | 1.8 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-TSSOP |
|
MAX4475AUT#TG16IC OPAMP GP 1 CIRCUIT SOT6 |
1,216 |
|
Datasheet | - | SOT-23-6 | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 3V/µs | 10 MHz | - | 1 pA | 70 µV | 2.5mA | 48 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-6 |
|
|
MAX409BEPAIC OPAMP GP 1 CIRCUIT 8DIP |
4,539 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.08V/µs | 150 kHz | - | 0.1 pA | 750 µV | 1µA | 600 µA | 2.5 V | 10 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
MAX2470EUT+IC BUFFER 1 CIRCUIT SOT23-6 |
4,034 |
|
Datasheet | - | SOT-23-6 | Active | Buffer | 1 | Differential | - | - | - | 10 µA | - | 5.5mA | - | 2.7 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-6 | |
|
|
MAX4168ESD+TIC OPAMP GP 2 CIRCUIT 14SOIC |
3,165 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 2V/µs | 5 MHz | - | 50 nA | 250 µV | 1.3mA (x2 Channels) | 125 mA | 2.7 V | 6.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
MAX4384EUP+TIC OPAMP VFB 4 CIRCUIT 20TSSOP |
2,006 |
|
Datasheet | - | 20-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Last Time Buy | Voltage Feedback | 4 | Rail-to-Rail | 485V/µs | - | 210 MHz | 8.5 µA | 3 mV | 7.5mA (x4 Channels) | 75 mA | 4.5 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 20-TSSOP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
