Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ICL7611DCSAIC OPAMP GP 1 CIRCUIT 8SOIC |
1,449 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 1 | Rail-to-Rail | 1.6V/µs | 1.4 MHz | - | 1 pA | 15 mV | 1mA | - | 2 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
|
MAX4377FASA+TIC CURRENT SENSE 2 CIRCUIT 8SOIC |
3,618 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Current Sense | 2 | - | 10V/µs | - | 2 MHz | 120 µA | - | 1mA (x2 Channels) | - | 3 V | 28 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
MAX44286FAZS+TIC CURRENT SENSE 1 CIRCUIT 4WLP |
2,719 |
|
Datasheet | - | 4-XFBGA, WLBGA | Tape & Reel (TR) | Active | Current Sense | 1 | - | 0.08V/µs | 200 kHz | - | 20 pA | 7 µV | 12.5µA | - | 1.6 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 4-WLP (0.76x0.76) |
|
|
MAX44286WAZS+TIC CURRENT SENSE 1 CIRCUIT 4WLP |
3,852 |
|
Datasheet | - | 4-XFBGA, WLBGA | Tape & Reel (TR) | Active | Current Sense | 1 | - | 0.08V/µs | 200 kHz | - | 20 pA | 7 µV | 12.5µA | - | 1.6 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 4-WLP (0.76x0.76) |
|
MAX40056UAUA/V+TIC CURRENT SENSE 1 CIRCUIT 8UMAX |
3,453 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | Push-Pull, Rail-to-Rail | 1.5V/µs | - | 300 kHz | 30 µA | 20 µV | 6mA | 20 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | Automotive | - | Surface Mount | 8-uMAX/uSOP |
|
MAX40016ATE+IC CURR SENSE 1 CIRCUIT 16TQFN |
4,691 |
|
Datasheet | - | 16-WQFN Exposed Pad | Strip | Obsolete | Current Sense | 1 | - | - | 700 kHz | - | - | 20 µV | 800µA | 28 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 16-TQFN (4x4) |
|
|
MAX4209TAUA+TIC INST AMP 1 CIRCUIT 8UMAX |
2,916 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Obsolete | Instrumentation | 1 | Rail-to-Rail | 0.055V/µs | 750 kHz | 7.5 kHz | 1 pA | 3 µV | 1.4mA | 25 mA | 2.85 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-uMAX/uSOP |
|
MAX4127ESDIC OPAMP GP 2 CIRCUIT 14SOIC |
2,899 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 2V/µs | 5 MHz | - | 50 nA | 250 µV | 725µA (x2 Channels) | 50 mA | 2.7 V | 6.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
MAX4376HAUK/V+TIC CURR SENSE 1 CIRCUIT SOT23-5 |
1,823 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | Current Sense | 1 | - | 10V/µs | - | 1.2 MHz | 800 µA | - | 1mA | - | 3 V | 28 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | SOT-23-5 |
|
MAX4378FAUD-TIC CURR SENSE 4 CIRCUIT 14TSSOP |
3,419 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Obsolete | Current Sense | 4 | - | 10V/µs | - | 2 MHz | 120 µA | - | 1mA (x4 Channels) | - | 3 V | 28 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
