Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MAX4233ABCIC CMOS 2 CIRCUIT 12UCSP |
1,610 |
|
Datasheet | - | 10-WFBGA, CSPBGA | Bulk | Obsolete | CMOS | 2 | Rail-to-Rail | 10V/µs | 10 MHz | - | 1 pA | 850 µV | 1.2mA (x2 Channels) | 200 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 10-UCSP |
|
MAX473ESA+IC OPAMP GP 1 CIRCUIT 8SOIC |
2,105 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 17V/µs | 12 MHz | - | 80 nA | 700 µV | 2mA | - | 2.7 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
MAX473ESAIC OPAMP GP 1 CIRCUIT 8SOIC |
2,044 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 1 | Rail-to-Rail | 17V/µs | 12 MHz | - | 80 nA | 700 µV | 2mA | - | 2.7 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
MAX409AEPAIC OPAMP GP 1 CIRCUIT 8DIP |
3,417 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.08V/µs | 150 kHz | - | 0.1 pA | 250 µV | 1µA | 600 µA | 2.5 V | 10 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
MAX4108ESA+TIC OPAMP GP 1 CIRCUIT 8SOIC |
1,052 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 1 | - | 1200V/µs | - | 400 MHz | 12 µA | 1 mV | 20mA | 100 mA | 12 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
MAX419ESD+TIC OPAMP GP 4 CIRCUIT 14SOIC |
2,530 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 4 | Rail-to-Rail | 0.08V/µs | 150 kHz | - | 0.1 pA | 1 mV | 1µA (x4 Channels) | 600 µA | 2.5 V | 10 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
|
MAX404ESAIC OPAMP GP 2 CIRCUIT 8SOIC |
3,472 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 0.04V/µs | 90 kHz | - | 2 nA | 200 µV | 14µA (x2 Channels) | 2.5 mA | 2.4 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
MAX3864ESAIC PREAMP TRANS 2.5GBPS 8-SOIC |
2,870 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Discontinued at Digi-Key | Transimpedance | 1 | - | - | - | - | - | - | - | - | - | - | - | - | - | Surface Mount | 8-SOIC |
|
|
ICL7614ACSAIC OPAMP GP 1 CIRCUIT 8SOIC |
4,133 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.16V/µs | 480 kHz | - | 1 pA | 2 mV | 100µA | - | 2 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
ICL7614ACPAIC CMOS 1 CIRCUIT 8DIP |
6,227 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | CMOS | 1 | Rail-to-Rail | 1.6V/µs | 1.4 MHz | - | 1 pA | 2 mV | 1mA | - | 2 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
