Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MAX4288ESDIC BUFFER 2 CIRCUIT 14SOIC |
598 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Buffer, Voltage Feedback | 2 | - | 385V/µs | - | 250 MHz | 13 µA | 1.5 mV | 23mA (x2 Channels) | 106 mA | 2.85 V | 6.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
MAX4178EPA+GAIN OF +1 CLOSED-LOOP BUFFER |
4,709 |
|
Datasheet | MAX4178 | 8-DIP (0.300", 7.62mm) | Bulk | Active | Buffer, Current Feedback | 1 | Single-Ended | 1.3kV/µs | - | 330 MHz | 1 µA | 500 µV | 8mA | 100 mA | - | 12 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
MAX4251ESA-TIC OPAMP GP 1 CIRCUIT 8SOIC |
2,165 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Push-Pull, Rail-to-Rail | 0.3V/µs | 3 MHz | - | 1 pA | 70 µV | 420µA | 68 mA | 2.4 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
MAX4243ESDIC OPAMP GP 2 CIRCUIT 14SOIC |
6,915 |
|
Datasheet | Beyond-the-Rails™ | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 0.04V/µs | 90 kHz | - | 2 nA | 200 µV | 14µA (x2 Channels) | 2.5 mA | 1.8 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
MAX4470EWT+TIC OPAMP GP 1 CIRCUIT 6WLP |
2,708 |
|
Datasheet | - | 6-WFBGA, WLBGA | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.002V/µs | 9 kHz | - | 200 pA | 500 µV | 750nA | 36 mA | 1.8 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 6-WLP (1.24x0.84) |
|
MAX473CUA+IC OPAMP GP 1 CIRCUIT 8UMAX |
1,916 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 17V/µs | 12 MHz | - | 80 nA | 700 µV | 2mA | - | 2.7 V | 5.25 V | 0°C ~ 70°C | - | - | Surface Mount | 8-µMAX |
|
|
MAX4415ESAIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
3,804 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Voltage Feedback | 1 | Rail-to-Rail | 470V/µs | - | 150 MHz | 1.3 µA | 500 µV | 1.6mA | 75 mA | 2.7 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
MAX4395EUDIC OPAMP GP 4 CIRCUIT 14TSSOP |
4,374 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Bulk | Active | General Purpose | 4 | Rail-to-Rail | 500V/µs | 1.8 MHz | - | 700 nA | 500 µV | 6mA (x4 Channels) | 95 mA | 4.5 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 14-TSSOP |
|
MAX473EPA+IC OPAMP GP 1 CIRCUIT 8DIP |
342 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 17V/µs | 12 MHz | - | 80 nA | 700 µV | 2mA | - | 2.7 V | 5.25 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
MAX4118ESAIC AMP DUAL HS 500MHZ 8-SOIC |
5,794 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Current Feedback | 2 | - | 1200V/µs | - | 400 MHz | 3.5 µA | 1 mV | 5mA (x2 Channels) | 80 mA | 9 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
