Instrumentation, Op Amps, Buffer Amps
Explore Instrumentation, Op Amps, Buffer Amps parts from multiple manufacturers, with model information, availability, datasheets and technical specifications for engineering and purchasing.
For parts that are not shown in the list, send the manufacturer part number, quantity or BOM to JIEXIN Electronics. Our team can assist with availability checks and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
SN1208048YSSN1208048YS |
4,928 |
|
Datasheet | - | - | Bulk | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
MPD23747-WMPD23747-W |
3,283 |
|
Datasheet | - | - | Bulk | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
MPD23809-WMPD23809-W |
4,628 |
|
Datasheet | - | - | Bulk | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
LM324NIC OPAMP GP 4 CIRCUIT DIP-14 |
4,293 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 4 | Push-Pull | - | - | - | 20 nA | 3 mV | 375µA (x4 Channels) | 40 mA | 2 V | 30 V | 0°C ~ 70°C | - | - | Through Hole | 14-DIP |
|
LM358GNIC OPAMP GP 2 CIRCUIT DIP-8 |
2,583 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 2 | Single-Ended | 0.7V/µs | 700 kHz | - | 20 nA | 3 mV | 500µA (x2 Channels) | 35 mA | 5 V | 40 V | -40°C ~ 125°C (TA) | - | - | Through Hole | 8-DIP |
|
LM2904NIC OPAMP GP 2 CIRCUIT DIP-8 |
3,035 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 2 | Push-Pull | 0.7V/µs | 700 kHz | - | 20 nA | 3 mV | 500µA (x2 Channels) | 50 mA | 5 V | 40 V | -40°C ~ 125°C | - | - | Through Hole | 8-DIP |
|
|
LM4558NIC OPAMP GP 2 CIRCUIT DIP-8 |
2,425 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 2 | Single-Ended | - | - | - | 480 nA | 5 mV | - | - | 10 V | 30 V | -25°C ~ 85°C (TA) | - | - | Through Hole | 8-DIP |
|
|
MCP6C26T-200E/LTZERO-DRIFT, CURRENT SENSE AMPLIF |
2,022 |
|
Datasheet | - | - | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
MCP6C26T-050E/LTZERO-DRIFT, CURRENT SENSE AMPLIF |
1,835 |
|
Datasheet | - | - | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
MCP6C26T-100E/LTZERO-DRIFT, CURRENT SENSE AMPLIF |
2,112 |
|
Datasheet | - | - | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
MCP6489T-E/ST12MQUAD, 3 MHZ GEN PURPOSE OP-AMP W |
4,052 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | Standard | 4 | Single Ended, Rail-to-Rail | 20V/µs | 10 MHz | - | 1 pA | 1.6 mV | 550µA (x4 Channels) | 50 mA | 1.8 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 14-TSSOP |
|
|
NCS7031D1G020R2G80 V COMMON-MODE, CURRENT SENSE |
4,926 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Discontinued at Digi-Key | Current Sense | 1 | Single-Ended | 1V/µs | - | 100 kHz | 200 µA | 100 µV | 1.5mA | 50 mA | 3 V | 5.5 V | -40°C ~ 150°C (TA) | - | - | Surface Mount | 8-SOIC |
|
|
LM833NOPERATIONAL AMPLIFIER, LOW NOISE |
3,474 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Discontinued at Digi-Key | Standard | 2 | Single-Ended | 7V/µs | 15 MHz | - | 300 µA | 300 mV | 2mA (x2 Channels) | 29 mA | 10 V | 36 V | -40°C ~ 85°C (TA) | - | - | Through Hole | 8-PDIP |
|
|
NCS21872MUTBG45V OFFSET, 0.4VC, ZERO-DRIFT OP |
1,593 |
|
Datasheet | Zero-Drift | 8-UFDFN Exposed Pad | Bulk | Discontinued at Digi-Key | Chopper (Zero-Drift) | 2 | Single Ended, Rail-to-Rail | 0.1V/µs | 270 kHz | - | 60 pA | 6 µV | 28µA (x2 Channels) | 11 mA | 1.8 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-UDFN (2x2) |
|
|
NCV20164DR2G8 MHZ, RAIL-TO-RAIL CMOS OPERATI |
4,543 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Discontinued at Digi-Key | Standard | 4 | Single Ended, Rail-to-Rail | 3.5V/µs | 8 MHz | - | 5 pA | 300 mV | 500µA (x4 Channels) | 50 mA | 1.8 V | 5.5 V | -40°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 14-SOIC |
|
LM2904DOPERATIONAL AMPLIFIER, SINGLE SU |
4,939 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Discontinued at Digi-Key | Standard | 2 | Push-Pull | 0.6V/µs | 1 MHz | - | 45 nA | 2 mV | 750µA (x2 Channels) | 40 mA | 3 V | 32 V | -40°C ~ 105°C (TA) | - | - | Surface Mount | 8-SOIC |
|
|
LM258DOPERATIONAL AMPLIFIER, SINGLE SU |
2,064 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Discontinued at Digi-Key | Standard | 2 | Push-Pull | - | - | - | 45 nA | 2 mV | 750µA (x2 Channels) | 40 mA | 3 V | 32 V | -25°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
|
MC3403DOPERATIONAL AMPLIFIER, SINGLE SU |
2,504 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Discontinued at Digi-Key | Standard | 4 | Push-Pull | 0.6V/µs | - | 1 MHz | 200 nA | 2 mV | 700µA (x4 Channels) | 20 mA | 3 V | 36 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 14-SOIC |
|
|
MC33172DOPERATIONAL AMPLIFIER, SINGLE SU |
1,330 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Discontinued at Digi-Key | Standard | 2 | Single-Ended | 2.1V/µs | 1.8 MHz | - | 20 nA | 2 mV | 220µA (x2 Channels) | 27 mA | 3 V | 44 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
|
|
LM201ADOPERATIONAL AMPLIFIER, NON-COMPE |
2,137 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Discontinued at Digi-Key | Standard | 1 | Push-Pull | 10V/µs | 1 MHz | - | 30 nA | 700 mV | 1.8mA | - | - | 44 V | -25°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
