Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LT1122CS8LT1122 - FAST SETTLING, JFET INP |
1,135 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | J-FET | 1 | - | 75V/µs | 13 MHz | - | 12 pA | 130 µV | 7.8mA | - | 10 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
|
LT1996AIDD#PBFLT1996 - PRECISION DIFFERENCE AM |
242 |
|
Datasheet | * | 10-WFDFN Exposed Pad | Bulk | Obsolete | Programmable Gain | 1 | - | 0.12V/µs | 560 kHz | 38 kHz | 2.5 nA | 25 µV | 130µA | 21 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 10-DFN (3x3) |
|
LTC6911HMS-2#PBFLTC6911 - DUAL DIGITALLY CONTROL |
531 |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Bulk | Obsolete | Programmable Gain | 2 | - | 16V/µs | 11 MHz | - | - | 2 mV | 3.1mA (x2 Channels) | 35 mA | 2.7 V | - | -40°C ~ 125°C | - | - | Surface Mount | 10-MSOP |
|
LT1817IGN#PBFLT1817 - QUAD 220MHZ, 1500V/US O |
123 |
|
Datasheet | LT® | 16-SSOP (0.154", 3.90mm Width) | Bulk | Obsolete | Voltage Feedback | 4 | - | 1500V/µs | 220 MHz | 350 MHz | 2 µA | 200 µV | 6.5mA (x4 Channels) | 80 mA | 4 V | 12.6 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SSOP |
|
LT1057SW#PBFLT1057 - DUAL JFET INPUT PRECISI |
188 |
|
Datasheet | LT® | 16-SOIC (0.295", 7.50mm Width) | Bulk | Active | J-FET | 2 | - | 13V/µs | 5 MHz | - | 10 pA | 300 µV | 1.7mA (x2 Channels) | - | 20 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SO |
|
|
LT1057SW#TRPBFLT1057 - DUAL JFET INPUT PRECISI |
1,000 |
|
Datasheet | LT® | 16-SOIC (0.295", 7.50mm Width) | Bulk | Active | J-FET | 2 | - | 13V/µs | 5 MHz | - | 10 pA | 300 µV | 1.7mA (x2 Channels) | - | 20 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SO |
|
LTC6410IUD-6#PBFLOW DISTORTION, LOW NOISE DIFFER |
484 |
|
Datasheet | - | 16-WFQFN Exposed Pad | Bulk | Active | RF/IF Differential | 1 | Differential | 1500V/µs | - | 1.4 GHz | - | 400 µV | 125mA | 42 mA | 2.8 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 16-QFN (3x3) |
|
LT1122BCN8#PBFIC OPAMP JFET 1 CIRCUIT 8DIP |
124 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | J-FET | 1 | - | 80V/µs | 14 MHz | - | 10 pA | 120 µV | 7.5mA | - | 10 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
LT1260CS#TRPBFIC OPAMP CFA 3 CIRCUIT 16SO |
159 |
|
Datasheet | LT® | 16-SOIC (0.154", 3.90mm Width) | Bulk | Active | Current Feedback | 3 | - | 1600V/µs | 130 MHz | 130 MHz | 20 µA | 2 mV | 5mA (x3 Channels) | 60 mA | 4 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SO |
|
LT1221CN8#PBFLT1221 - VERY HI SPEED OA (AV=4) |
1,076 |
|
Datasheet | C-Load™ | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 250V/µs | 150 MHz | - | 100 nA | 200 µV | 8mA | 26 mA | 10 V | 30 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
